W Lu, W Pan, Z Chen, Y Gao, L Ding, X Chen… - Chemical Engineering …, 2023 - Elsevier
Proton exchange membrane fuel cell (PEMFC) is an important device to convert clean-fuel hydrogen into electricity, which has the potential to reduce pollutant emission and our …
The aim of this study is to analyze numerically a multistage pump with some new approaches and compare the results with experimental data. A centrifugal pump, consisting …
Agitated tubular reactor (ATR) is an intensified continuous reactor in which radial mixing is decoupled from axial flow. This study proposed a novel CFD model to study fluid dynamics …
M Barrett, D O'Grady, E Casey, B Glennon - Chemical engineering science, 2011 - Elsevier
This paper establishes links between the available turbulent mixing capability in a fed-batch reactor and important crystallization characteristics such as the metastable zone width …
Y Zou, SS Ye, YD Wang, WY Fei - Journal of the Taiwan Institute of …, 2016 - Elsevier
A computational fluid dynamics (CFD) simulation based on Eulerian–Eulerian two-phase method and Reynolds average Navier–Stokes (RANS) approach accompanied by …
DA Rao, P Sivashanmugam - Journal of Industrial and Engineering …, 2010 - Elsevier
Experimental and simulation investigation on power consumption in new energy saving turbine agitator has been presented here. Modification was done by introducing single and …
KC Ng, EYK Ng - Chemical engineering science, 2013 - Elsevier
The laminar mixing performance in a cylindrical vessel agitated by a plate impeller is investigated. Several mixing enhancement strategies such as baffling, shaft eccentricity and …
Z Sun, G Xi, X Chen - Chemical Engineering Science, 2009 - Elsevier
The process of stir mixing of two viscous liquids is simulated using the moving particle semi- implicit (MPS) method. A mixing rate is defined within the particle method to characterize the …
H Zhou, J Yang, S Jing, W Lan… - Industrial & Engineering …, 2019 - ACS Publications
The influence of dispersed-phase viscosity on droplet breakup in a pump-mixer was determined using a direct measurement approach, which was performed using a high …