The significance of Mg (alloy) extends to both the mechanical engineering and medical
sectors. However, Mg is known for its high reactivity, posing significant challenges to its …

The thermal deformation behavior of 3Cr23Ni8Mn3N heat resistant steel was studied by
high–temperature thermal compression test in the deformation temperature range of 1000 …

The hot workability and deformation characteristics of modified AA5052 were evaluated by
hot torsion testing in the temperature range 573–773 K and at strain rates of 0.1–10 s− 1 …

Abstract Effects of zinc-coated steel type and steel surface sandblasting pretreatment in the
solid-liquid compound casting of layered type steel/aluminum bimetals were investigated …

According to the characteristics of open die forging for heavy forgings, the compression tests
in the temperature range of 1373− 1523 K and strain rate range of 0.001− 0.1 s− 1 were …

The plastic deformation mechanism and dynamic recrystallization behavior of AZ31
magnesium alloy were investigated under hot compression at 350° C and a strain rate of 0.1 …

Herein, the hot deformation behavior of 1Cr12Ni2Mo2WVNb martensitic stainless steel is
investigated through the high‐temperature thermal compression test. Meanwhile, a strain …

In this study, hot deformation behavior of in-situ nanosized TiB 2/AZ91 composite is
investigated by analyzing the constitutive equation, hot processing maps and microstructure …

Al–Si alloy is widely utilized in automobile pistons and cylinders due to good castability, high
strength-to-weight ratio, excellent thermal conductivity, good resistance to …

To simulate the effects of hot working parameters on microstructure and flow resistance
during dynamic recrystallization (DRX) of a Ni–Cr–Mo-based C276 superalloy, a 2D …