In this research work, investigation on different surface modification techniques on cutting
tools such as TiN-WS 2 coating (T2), textured cutting tool (T3) and TiN-WS 2 coated textured …

The low thermal conductivity of titanium alloys, Ti-6Al-4V in specific causes high temperature
generation at the tool-chip interface during machining, thus making machining challenging …

Manufacturers confront considerable difficulties when machining titanium and nickel-based
alloys due to concerns related to surface integrity, tool wear, cutting forces and temperature …

This paper presents the development of (002) textured Ti 2 AlN coated wear resistant tool
utilizing reactive magnetron co-sputtering. The Ti 2 AlN coating was developed in two …

This article presents the development of superimposed Ti 2 AlN MAX phase coatings on
cutting tools through reactive co-sputtering technique in dry machining of Ti-6Al-4 V. The …

This study reports the reactive co-sputtering of CrN and WS 2 in order to develop CrN x-WS
2 solid lubricant nanocomposites. The nitrogen flow rate during the deposition process was …

Responding to the current urgent need for low carbon emissions and high efficiency in
manufacturing processes, the relationships between three different machining factors (depth …

Los centros de mecanizado demandan un alto consumo de energía afectando los costos de
producción en las empresas que los emplean. Diferentes estudios relacionan múltiples …

Die steels are heavily used in the die/mold manufacturing industry. Their excellent
mechanical and chemical properties make them very attractive for this industry. They are …

Machining centers are complex equipment that demand high energy consumption affecting
the production costs. Different studies have related some factors with the energy …