Hot corrosion behaviors of directed energy deposited Inconel 718/Haynes 25 functionally graded material at 700 C and 900 C
K Luo, S Li, G Xu, SRE Hosseini, J Lu - Corrosion Science, 2022 - Elsevier
The hot corrosion behaviors of directed energy deposited Inconel 718/Haynes 25
functionally graded materials (FGMs) coated with 75% Na 2 SO 4+ 25% NaCl molten salt at …
functionally graded materials (FGMs) coated with 75% Na 2 SO 4+ 25% NaCl molten salt at …
航空发动机和燃气轮机热端部件热腐蚀‑疲劳研究进展.
宋迎东， 凌晨， 张磊成， 李明亮… - Journal of Nanjing …, 2022 - search.ebscohost.com
航空发动机和燃气轮机在海洋环境下服役时, 热端部件承受高温, 高压, 高转速机械载荷和高盐雾
, 高湿度等腐蚀环境耦合作用, 常发生热腐蚀⁃ 疲劳失效, 影响结构完整性, 安全性和可靠性 …
, 高湿度等腐蚀环境耦合作用, 常发生热腐蚀⁃ 疲劳失效, 影响结构完整性, 安全性和可靠性 …
Significant improvement in hot corrosion resistance of Inconel 690 by laser shock peening
J Zhu, Z Wang, C Wang, K Luo, J Lu - Surface and Coatings Technology, 2024 - Elsevier
The effects of laser shock peening (LSP) with different peening times on the hot corrosion
behavior (molten salt of 75 wt% Na 2 SO 4+ 25 wt% NaCl) of Inconel 690 at three different …
behavior (molten salt of 75 wt% Na 2 SO 4+ 25 wt% NaCl) of Inconel 690 at three different …
Hot corrosion behavior of a novel TiC/GTD222 nickel-based composite prepared by selective laser melting
Y Lv, Y Liu, Q Zhang, R Wang, Y Lu, B Tang… - Materials …, 2023 - Elsevier
In this study, a novel TiC/GTD222 nickel-based composite with enhanced hot corrosion
resistance was designed by incorporating appropriate amounts of C, Al, and Ti elements into …
resistance was designed by incorporating appropriate amounts of C, Al, and Ti elements into …
Corrosion behavior of HDA (hot-dip aluminized) carbon steel C45 half immersed in molten salts (NaCl, Na2SO4) isothermally at 973 K
HJ Muhammed, D Koncz-Horváth… - Journal of Adhesion …, 2023 - Taylor & Francis
Aluminized carbon steel C45 samples of 0.44 wt.% carbon content were immersed half in a
molten salt mixture (NaCl+ Na2SO4 with a ratio of 1: 3) at a temperature of around 973 K …
molten salt mixture (NaCl+ Na2SO4 with a ratio of 1: 3) at a temperature of around 973 K …
[PDF][PDF] High-Temperature Corrosion Resistance Investigation of Hot-Dip Aluminized Carbon Steel C45
HJ Muhammed - 2024 - real-phd.mtak.hu
Operating metallic base materials in most structural components is still a practical matter.
These materials have superior mechanical and physical properties, which are the primary …
These materials have superior mechanical and physical properties, which are the primary …
[PDF][PDF] ANTAL KERPELY DOCTORAL SCHOOL OF MATERIALS SCIENCE & TECHNOLOGY
HJ Muhammed - 2023 - 193.6.1.94
Operating metallic base materials in most structural components is still a practical matter.
These materials have superior mechanical and physical properties, which are the primary …
These materials have superior mechanical and physical properties, which are the primary …
The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850° C
M Badaruddin, D Asmi - Materials Research Express, 2019 - iopscience.iop.org
An ASTM A29 steel was coated with aluminide by dipping in a molten Al bath at 700 C for 16
s. The resistance of ASTM A29 steel to high-temperature oxidation drastically decreased …
s. The resistance of ASTM A29 steel to high-temperature oxidation drastically decreased …