Comminution and classification are the two major unit operations involved in the processing
of pure minerals from its ore rocks. In the current paper, an assessment is made on different …

Cyclone separators are devices whose modeling still represents a significant challenge,
despite their vast use as a fundamental component in different industries. Computational …

A numerical study of unsteady single-phase vortical flow inside a cyclone is presented. Two
different geometric configurations have been considered, with the goal of assessing several …

In this study, the effects of vane channel parameters on the flow field and separator
performance are investigated based on a vane type gas-water separator for a PEMFC …

Complicated flows featuring with highly three-dimensionality and intense rotation/curvature
in turbomachines have made the steady Reynolds-averaged Navier–Stokes (RANS) …

The article is an attempt to compile the results of CFD liquid flow simulation through pipeline
section containing hydraulic elbow with the results of ultrasonic flow measurements. To carry …

The condensation of saturated steam bubbles in sub-cooled water inside a vertical pipe was
studied by poly-disperse CFD simulations. Six test cases with varied pressure, liquid sub …

An understanding of the flow behaviour in industrial crystallisers is critical to addressing
mechanical design considerations such as impeller selection and off-bottom solids …

The velocity profiles and separation efficiency curves of a hydrocyclone were predicted by
an Euler–Euler approach using a computational fluid dynamics tool ANSYS-CFX 14.5. The …

In a recirculating aquaponic system (RAS), the heating method based on an electric heater
requires considerable amounts of electrical energy to maintain the water temperature for …