The current commercial deployment of concentrating solar power (CSP) relies on a system
of thermal energy storage (TES) for round the clock generation of electricity. The heat …

To lower the cost of electricity produced, advanced high-efficiency power cycles operating at
temperatures above 600° C (such as the supercritical CO 2 Brayton cycle) are presently …

Thermal energy storage (TES) technologies have been selected as key enabling
technologies to mitigate climate change and to assess renewable energy deployment …

Thermal spraying is a broad terminology for a coating process in which materials are
deposited in a spray of finely distributed liquefied or semi-liquefied particulates to build …

Abstract Stainless steels (SS) 310, 321, 347, Incoloy 800H (In800H), alumina-forming
austenitic (AFA-OC6), Ni superalloy Inconel 625 (IN625), and MCrAlX (M: Ni, and/or Co; X …

Sprayed slurry aluminide and nickel-aluminide coatings deposited by means of
electrodeposition and slurry application to 9 wt% Cr P91 alloy were studied to mitigate …

Solar power is a sustainable and affordable source of energy, and has gained interest from
academies, companies, and government institutions as a potential and efficient alternative …

In concentrated solar power (CSP) technology, high temperature corrosion is a key issue for
material selection. In this context, a homogeneous and crack-free FeAl coating with high Al …

In the strongly corrosive environment of the molten carbonate fuel cells (MCFC) the
protection of the wet-seal areas of the bipolar plates is accomplished by aluminum diffusion …

Slurry iron-aluminide coatings deposited by spraying on 9 wt% Cr P91 alloy as well as
uncoated P91 were exposed isothermally at 650° C to a ternary molten salt mixture based …