Highlights•The eutectic CoFeNi 2 V 0.5 Nb 0.75 high entropy alloys exhibit excellent thermal
stability.•AQ-700 sample exhibits the highest hardness of HV 727.52.•AQ-800 sample shows …

This study explores the influence of tin (Sn) content on the properties of Ti7CuXSn (X= 2, 7,
and 15 wt%) alloys, in both as-cast and heat-treated conditions. The investigation reveals …

Abstract The β-type Ti–Fe–Sn alloys with high specific strength and low elastic modulus are
prepared by rapidly solidified technology. The microstructure and mechanical properties of …

The synthesis and characterization of Ti40Zr20Hf20Fe20 (atom%) alloy, in the form of rods
(ϕ= 2 mm), prepared by arc-melting, and subsequent Cu mold suction casting, is presented …

In the biomedical field, a main challenge is to find a material that can provide all the
requirements imposed by biomedical applications, including consisting of biocompatible …

In this study, Zr atoms transition from a disordered state to a short-range ordered state due to
increased diffusion drive in high Zr content brazed joints. This atomic ordering leads to …

Even though rapidly solidified Ti–Fe eutectic alloys may achieve good mechanical strength,
increase in ductility is already a task to be accomplished. Addition of tin and arrangements of …

In this study, the high-temperature microstructural characteristics of the Ti–5Al–1Sn–1Fe–
1Cr (Ti-5111) alloy were determined by optical microscopy, scanning electron microscopy …

The current investigation reports detailed study on the microstructural evolution in the
suction cast hypereutectic Ti 71 Fe 29− x Sn x alloys during Sn addition with x= 0, 2, 2.5, 3 …

The purpose of the present study was to investigate the microstructure and microhardness of
novel Ti7CuXSn alloys. Ti7CuXSn alloys with x= 0, 1, 2· 5 and 5 wt-were synthesised using …