Traditional chemical mechanical polishing (CMP) normally employs noxious slurries,
leading to pollution to the environment. It is a challenge to achieve atomic surfaces of nickel …

Implants are used to replace damaged biological structures in human body. Although
stainless steel (SS) is a well-known implant material, corrosion of SS implants leads to the …

This review covers the literature that is currently accessible, as well as emerging research
into the performance of NiTi-based alloys exposed to corrosive environments in both …

This paper investigates the microstructure and mechanical properties of Ti50Ni (50− X) Fe X
alloys fabricated by powder metallurgy technique. Here, sintering temperatures varied from …

In this research work, the effect of Fe additions on the phase evolution, microstructure,
chemical composition, transformation behaviour and properties of Ni (50− X) Ti50FeX shape …

Thin-walled tubes with elliptically shaped annular sections are widely applied in fuel ducts
and exhaust pipes. However, the tensile mechanical properties of these structures have …

The microstructure and mechanical properties of Ni-rich alloys with the addition of Sc range
from 0.15 at% to 0.5 at% were investigated by X-ray diffractometer (XRD), electro-probe …

Abstract Highly Ni-rich NiTi alloys have attracted increasing attention as new candidates for
bearing materials owing to their high hardness, low density, good corrosion resistance, and …

Prior investigations have demonstrated enhanced mechanical properties, such as hardness
and wear resistance, through high-entropy alloy designs that contain refractory metals. We …

The work aims to study the effect of the Fe content on the properties of Ti50 Ni (50− X) Fe X
alloy (where X= 0, 2, 4, 6, 8, and 10 at.-%) sintered at 1050° C and 1150° C using the …