An ultra-strong and ductile Mg-8.2 Gd-3.8 Y-1Zn-0.4 Zr (wt pct) alloy was developed by
using hot extrusion to modify the microstructure via forced-air cooling and an artificial aging …

Magnesium alloys are highly attractive for their application as structural materials as well as
medical implants. A range of alloying systems exists which are investigated, eg, in terms of …

The influence of the volume fraction of long-period stacking ordered structure (LPSO) on the
microstructure and mechanical properties in three extruded Mg 100-3 x Y 2 x Zn x alloys (x …

The combined effects of LPSO orientation and α-Mg texture on tensile anisotropy were
investigated for an extruded Mg-Gd-Y-Zn-Zr alloy with a typical bimodal microstructure, a …

The dislocation configuration around low-angle kink boundaries formed in bent single
crystalline long-period stacking ordered (LPSO) Mg 85 Zn 6 Y 9 alloys was investigated …

The elastic properties of an Mg 85 Zn 6 Y 9 (at.%) alloy single crystal with a long-period
stacking-ordered (LPSO) structure, synchronized with periodic enrichment of Zn and Y …

Abstract The homogenized Mg-13Gd-4Y-2Zn-0.6 Zr alloy was subjected to different equal
channel angular pressing (ECAP) passes to investigate the effect of long period-stacking …

It has recently been found that Mg97Zn1Y2 extruded alloy containing a long-period stacking
ordered (LPSO) phase has superior mechanical properties. In this study, the high …

The age-hardening behavior and mechanical properties of the extruded Mg-2Gd-1.2 Y-0.5
Zn (at.%) alloy with Zr or Mn additions were investigated. The results show that Mn added …

A comparison has been made on the dynamic recrystallization (DRX), texture, and
mechanical properties of the Mg-5.5 Gd-4.4 Y-1.1 Zn-0.5 Zr (wt%) alloys extruded with …