[HTML][HTML] Numerical investigation of the effect of the turbulator geometry (disturber) on heat transfer in a channel with a square section

A Alizadeh, AM Abed, H Zekri, GF Smaisim… - Alexandria Engineering …, 2023 - Elsevier
The principal moot point in this investigation is heat removal from surfaces with high heat
flux, which is the use of tabulators and parts with a particular geometry, it has been chosen …

Multi-criteria decision analysis and experimental study on heat pipe thermoelectric generator for waste heat recovery

X Zhang, X Zhang, S Ge, B Zhang - Applied Thermal Engineering, 2024 - Elsevier
In the realm of heat conversion and utilization, gravity heat pipes have garnered significant
attention due to their exceptional heat conduction efficiency. As a strategy to effectively …

Numerical study on the flow characteristics of pressurized hydrogen leaking into the confined space through different shaped orifices

T Zhang, Y Jiang, S Wang, X Pan, M Hua… - International Journal of …, 2022 - Elsevier
The safety concerns associated with accidental hydrogen leakage remain a challenge.
Although numerous studies have been carried out on the flow behavior of compressed …

[HTML][HTML] Improvement on evaporation-condensation prediction of Lee model via a temperature deviation based dynamic correction on evaporation coefficient

Z Tan, Z Cao, W Chu, Q Wang - Case Studies in Thermal Engineering, 2023 - Elsevier
Lee model has been commonly accepted for modelling the mass transfer processes subject
to both evaporation or condensation. However, severe concern caused by improper setting …

[HTML][HTML] Applying numerical and computational methods to investigate the changes in the fluid parameters of the fluid passing over fins of different shapes with the …

R Fathollahi, S Hesaraki, A Bostani, E Shahriyari… - International Journal of …, 2022 - Elsevier
This paper examines the velocity and temperature variation in the x-direction as well as the
water fluid concentration through triangular, rectangular, and chamfer baffles in the …

A forced convection of water aluminum oxide nanofluid flow and heat transfer study for a three dimensional annular with inner rotated cylinder

Usman, AA Memon, M Alghamdi, T Muhammad - Scientific Reports, 2022 - nature.com
The article examines a water alumina nanofluid and heat transfer through the three-
dimensional annular. The annular is constructed by the two concentric cylinders in which the …

Thermal performance analysis of a flat-plate solar heater with zigzag-shaped pipe using fly ash-Cu hybrid nanofluid: CFD approach

N Azimy, MR Saffarian, A Noghrehabadi - Environmental Science and …, 2024 - Springer
Regarding the detrimental impacts of using non-renewable energy resources on the
environment and the importance of increasing heat transfer in heat exchangers, this …

CFD modeling of liquid-metal heat pipe and hydrogen inactivation simulation

X Wang, Y Shi, T Liu, S Wang, K Wang, H Chen… - International Journal of …, 2022 - Elsevier
The use of hydrogen window is a potential way for liquid metal heat pipes (LMHPs) to avoid
hydrogen inactivation when operated in a hydrogen-containing atmosphere. To reveal the …

Experimental investigation of the effect of mechanical vibration and rotating magnetic field on the hydrothermal performance of water-Fe3O4 ferrofluid inside a rifled …

A Shahsavar, IB Askari, M Ghodrat, M Arıcı… - Journal of Magnetism …, 2023 - Elsevier
Vibration can enhance the hydrothermal performance by disturbing the thermal boundary
layer. Also, the magnetic field increases the ferrofluid mixing, thereby enhancing the heat …

Heat transfer by oil natural convection in an annular space under combined effects of carbon nanotubes and electric field

S Rejeb, W Hassen, L Kolsi, P Estellé - International Communications in …, 2022 - Elsevier
In this study, the combined impact of carbon nanotube volume fractions and the electric field
on the enhancement of dielectric oil heat transfer is investigated. The geometry studied is an …