This study forms part of the current research on modern steel groups with higher resistance
to abrasive wear. In order to reduce the intensity of wear processes, and also to minimize …

The effect of a Zr addition on the precipitation behavior and mechanical properties in Nb-
containing alumina-forming austenitic (AFA) stainless steels was investigated using tensile …

Purpose: The work presents research results of impact of Nb, Ti and V microadditions on
flow stress, recrystallization kinetics and microstructure of newly elaborated steels assigned …

Results of the effect of deformation parameters on the hot-deformation behavior and
softening kinetics of two Ti–V–B-microalloyed steels were presented in the paper. The …

Previous work showed that a strong negative dependence of shape memory effect (SME)
existed on annealing twin boundaries (ATBs) in Fe-Mn-Si-based shape memory alloys …

The paper presents continuous cooling transformation (CCT) diagram of selected low-alloy
steel with high resistance to abrasion. Samples were prepared from examined material in as …

The work was aimed at analysing the effect of boron on austenite grain size of low-alloy cast
steels during austenitization in the range between 850° C and 1200° C. The effect of boron …

The production of mass-products of microalloyed steels with a high strength requires a
proper adjustment of the thermomechanical processing and the kinetics of the precipitation …

An investigation into the corrosion resistance of steels with various contents of carbon and
microalloying elements was carried out. It was shown that the presence of a large amount of …

The pinning effects of different particles on grain growth were investigated in Fe-20 mass%
Cr alloys deoxidised with Ti and Zr. More specifically, in-situ observations of the specimen …