A nondestructive assay system for radioactive waste management is proposed. The system
utilizes nuclear resonance fluorescence triggered by a quasi-monochromatic high-flux …

Powerful ERL for experiments (PERLE) is a novel energy recovery linac (ERL) test facility,
designed to validate choices for a 50 GeV ERL foreseen in the design of the Large Hadron …

Energy recovery linacs (ERLs), which can generate an electron beam having a high
average current and a small-emittance with the complete manipulation of electron beams in …

Beam breakup instability is a potential issue for all particle accelerators and is often the
limiting factor for the maximum beam current that can be achieved. This is particularly …

In recirculating accelerators, and, in particular, energy-recovery linacs, the maximum current
can be limited by multipass, multibunch beam breakup (BBU), which occurs when the …

A 10-kW-class high-power extreme ultraviolet light source is required in mass
microfabrication technologies, and a free-electron laser based on an energy recovery linac …

MESA is a two pass energy recovery linac (ERL) currently under construction at the
Johannes Gutenberg-University in Mainz. MESA uses four 1.3 GHz TESLA type cavities with …

The maximum achievable beam current in an Energy Recovery Linac (ERL) is often
constrained by Beam Breakup (BBU) instability. Our previous research highlighted that filling …

The spectral output power from the Jefferson Laboratory infra-red free electron laser is
primarily limited by the performance of the electron injector. Free electron laser power is …

An eccentric-fluted beam pipe is proposed to damp quadrupole modes in a cavity. The
eccentric flutes act as a mode converter from quadrupole to dipole. Optimizing the …