In this work, the S/Al interface properties are investigated by aberration-corrected HAADF-
STEM observations and first-principles calculations. Four interface atomic model is built from …

Abstract A fine (~ 3–10 μm) equiaxed zone (FQZ) between the heat affected zone and the
weld metal is a unique microstructural feature associated with fusion welded Zr-containing …

In addition to the three well-known Ag-related precipitates (Ω, X′ and Z) in the Al-Cu-Mg-Ag
alloys, Ag can also be involved in the formation of the as-cast second phases. However, the …

Intergranular corrosion is the main corrosion type of Al-Cu-Mg aluminum alloys, which
seriously reduce the lifetime of aircraft structural parts. In this paper, the microstructure and …

In order to investigate the effects of Mn and Cu additions on solidification microstructure and
high-temperature strength of cast Al–Fe alloys, we have fabricated various Al–Fe-based …

The present study aims to evaluate plastic deformation's effect by cold-rolling on the
precipitation sequence of 2024 aluminum alloy. X-ray diffraction, scanning/transmission …

Abstract Composition optimization of Al-Zn-Mg-Cu alloys were systematically investigated by
considering the precipitation strengthening and solid solution strengthening, based on …

This study investigates the precipitation behavior and phases stability in Al-Cu-Mg-Li-Sc
alloy during aging, using scanning electron microscopy (SEM), high-resolution transmission …

In the present study, we investigated the effects of Cu or Ni additions on the precipitation of
intermetallic phases in the heat-resistant aluminum alloy with a ternary composition of Al …

The precipitation kinetics of precipitates with different orientations and segregation in an
ultrafine grained (UFG) Al–Cu–Mg alloy (AA2024) aged at 210° C have been investigated …