Dissimilar welding of inconel alloys with austenitic stainless-steel: a review
In this review paper, dissimilar welding between Inconel and austenitic stainless steel along
with its application has been outlined for high-temperature applications. The mechanical …
with its application has been outlined for high-temperature applications. The mechanical …
Mechanical and microstructural characterization of TIG welded dissimilar joints between 304L austenitic stainless steel and Incoloy 800HT nickel alloy
In this article, the mechanical properties and microstructure of 304L austenitic stainless
steel/Incoloy 800HT nickel alloy dissimilar welded joints are investigated. The joints were …
steel/Incoloy 800HT nickel alloy dissimilar welded joints are investigated. The joints were …
Critical assessment on the influence of process parameters in micro-plasma arc welding process: a review
The current review work critically examines the role of input process parameters in
producing defect-free welds in the micro-plasma arc welding (M-PAW) of thin structures …
producing defect-free welds in the micro-plasma arc welding (M-PAW) of thin structures …
Some studies on nickel based Inconel 625 hard overlays on AISI 316L plate by gas metal arc welding based hardfacing process
NP Kumar, NS Shanmugam - Wear, 2020 - Elsevier
The aim of the study was to examine the characteristics of Inconel 625 hard overlays over
AISI 316L used for oil and gas industry applications. Weaving technique was adopted using …
AISI 316L used for oil and gas industry applications. Weaving technique was adopted using …
Analysis of thermal stresses and its effect in the multipass welding process of SS316L
H Vemanaboina, S Akella… - Proceedings of the …, 2021 - journals.sagepub.com
In this work, simulation has been carried out for multipass Gas tungsten Arc Welding of
SS316L and their effects were studied for thermal, and residual stresses and compared with …
SS316L and their effects were studied for thermal, and residual stresses and compared with …
An assessment of microstructure and mechanical properties of inconel 601/304 stainless steel dissimilar weld
The microstructure and the mechanical properties of dissimilar joints between Inconel 601
superalloy and 304 austenitic stainless steel were investigated in this work. For this purpose …
superalloy and 304 austenitic stainless steel were investigated in this work. For this purpose …
Microstructure and mechanical properties of wire arc additive manufactured bi-metallic structure
A Rajesh Kannan, S Mohan Kumar… - … and Technology of …, 2021 - journals.sagepub.com
Wire arc additive manufacturing (WAAM) with better material utilisation efficiency and higher
deposition rate was employed to fabricate bi-metallic structure (BMS) of non-stabilised …
deposition rate was employed to fabricate bi-metallic structure (BMS) of non-stabilised …
Microstructural and mechanical characterization of dissimilar metal welding of Inconel 625 and AISI 316L
F Dokme, MK Kulekci, U Esme - Metals, 2018 - mdpi.com
This study investigated the microstructure of the dissimilar metal welding of Inconel 625 and
AISI 316L using Continuous Current Gas Tungsten Arc Welding (CCGTAW) and Pulsed …
AISI 316L using Continuous Current Gas Tungsten Arc Welding (CCGTAW) and Pulsed …
Effect of power input on metallurgical and mechanical characteristics of Inconel-625 welded joints processed through microwave hybrid heating
RI Badiger, S Narendranath, MS Srinath… - Transactions of the …, 2019 - Springer
In the present study, welding of Inconel-625 through the use of microwave hybrid heating
(MHH) has been achieved at two power levels 600 W and 900 W in a low-cost home …
(MHH) has been achieved at two power levels 600 W and 900 W in a low-cost home …
Investigation of microstructure, mechanical, and corrosion behavior of nickel-based alloy 625/duplex stainless steel UNS S32205 dissimilar weldments using …
In this study, nickel-based alloy 625 and duplex stainless steel (DSS) UNS S32205 (2205)
dissimilar pairs were welded with metal inert gas (MIG) welding process. Weld metal …
dissimilar pairs were welded with metal inert gas (MIG) welding process. Weld metal …