The transformation-induced plasticity (TRIP) in advanced high-strength steels (AHSS) is
reviewed, where the main concepts and the recent progress in the processing and …

Recent progress in the understanding of the deformation-induced martensitic transformation,
the transformation-induced plasticity (TRIP) effect, and the reversion annealing in the …

Advanced high strength steels (AHSSs) are regarded as the most promising materials for
vehicles in the 21st century. AHSSs are complex and sophisticated materials, with …

This is a viewpoint paper on recent progress in the understanding of the microstructure–
property relations of advanced high-strength steels (AHSS). These alloys constitute a class …

Grain size effects on the properties of AISI 304 austenitic stainless steel are studied. Yield
stress (YS) and ultimate tensile strength (UTS) increased with decreasing grain size (Hall …

Dynamic recrystallization (DRX) is a major softening mechanism that impacts the
microstructural properties of 300M steel during the forging of large parts. It refines the grains …

Dynamic recrystallization (DRX) often takes place during hot deformation of metallic
materials, which then exerts significant influence on the final microstructures and …

Bulk hot deformation is a relatively old manufacturing technique widely adopted in different
industry fields to form and shape different metallic alloys. Martensitic stainless steels (MSS) …

Both the critical stress and strain for initiation of dynamic recrystallization (DRX) were
determined using:(1) the strain hardening rate versus stress curve,(2) the natural logarithm …

Hot deformation behavior of AISI 410 martensitic stainless steel was investigated by
conducting hot compression tests at the temperatures of 900–1150° C and the strain rates of …