Abstract Two metrics Kernel Average Misorientation (KAM) and Image Quality (IQ) widely
used in Electron Back-Scatter Diffraction (EBSD) mapping are compared with each other on …

In this study, an integrated crystal plasticity finite element–phase–field (CPFE–PF) model is
developed to examine dynamic recrystallization (DRX) in a dual phase Ti alloy. The CP …

Compared to hot forming, cold forming can manufacture components with higher accuracy
and better mechanical properties. However, for some light-weight and high-strength …

Abstract Misorientation data from Electron Backscatter Diffraction (EBSD) is often used to
identify strain localisation and quantify plastic strain at the microstructural scale. However …

Understanding the deformation, strengthening and failure mechanisms in polycrystalline
nickel-base superalloys is necessary to develop next generation alloys for application in …

This study investigates the use of ultrasonic nanocrystal surface modification (UNSM) to
enhance the surface integrity and mechanical properties of stainless steel fabricated using …

In this study, AZ91 alloy with heterogeneous structure comprised coarse, fine grained layers
and the heterogeneous precipitates was obtained via pre-aging and low-temperature …

In recent years, the possibility of using bainitic steels in railways has aroused considerable
interest due to the promising mechanical properties and performance in service. Concerning …

The 2195 aluminum alloy is limited in aerospace structural components due to its poor
formability at room temperature (RT) and narrow range of working parameters at hot …

We present a new method based on uncorrelated misorientation measurements by Electron
Backscattered Diffraction (EBSD) to characterize the dislocation density of site-specific areas …