Titanium alloy has been widely used for compressor discs in aero-engines due to its high
specific strength. As a common geometry feature in compressor discs, bolt hole with stress …

For the successful development of a structure, understanding of mechanical behaviour of the
selected material is an important issue to prevent damage or accidents. Mechanics of the …

In the present study, the stress gradient modified critical distance method is proposed to
predict the low‐cycle fatigue lifetime of notched TA19 specimens by introducing a weight …

A lifetime prediction method is proposed to predict the in-phase thermomechanical fatigue
(IP TMF) lifetime of notched nickel-based single crystal superalloy by combining continuum …

Frequent fatigue failures of aircraft hydraulic pipes were caused by a stress concentration
site in the form of a circumferential groove at the constrained pipe ends. The grooves were …

The design of metallic cast parts requires a compromise between the fatigue resistance of
the component and the allowable defect size due to the process. Treatment of defect …

Notch-tensile behavior of an Al 0.1 CrFeCoNi high entropy alloy (Al 0.1-HEA) was studied
using V-notch geometry and with local strain mapping using digital image correlation (DIC) …

The influence of the ratio between specimen thickness (t) and grain size (D) on the tensile
and fatigue properties of plain and notched aluminium plate specimens has been studied …

The notch effect significantly influences the fatigue response of components and is
particularly relevant for parts produced with additive manufacturing (AM) processes …

The notch sensitivity of additively manufactured IN 625 superalloy produces by laser powder
bed fusion (LPBF) has been investigated by tensile testing of cylindrical test pieces. Smooth …