Laves phases with their comparably simple crystal structure are very common intermetallic
phases and can be formed from element combinations all over the periodic table resulting in …

A Review on organized investigation on microstructure and mechanical properties of P91
Alloy steel treated with varying temperatures of Normalizing Heat Treatment process were …

Superior high temperature strength, better thermodynamic stability and good workability are
some of the desirable attributes of structural materials for next generation nuclear reactors …

The development of ODS materials for the cladding for Sodium Fast Reactors is a key issue
to achieve the objectives required for the GEN IV reactors. CEA, AREVA and EDF have …

Effects of tungsten and tantalum contents on impact, tensile, low cycle fatigue and creep
properties of Reduced Activation Ferritic–Martensitic (RAFM) steel were studied to develop …

The microstructural and mechanical properties of creep enhanced ferritic (CSEF) steels are
affected by various parameters, solutionizing temperature is one of them. In the present …

Reduced-activation ferritic–martensitic Eurofer-97 and ODS-Eurofer steels are potential
candidates for structural applications in advanced nuclear reactors. Samples of both steel …

Abstract Ferritic/martensitic (F/M) steels are promised candidate materials for the lead-
cooled fast neutron reactor. However, their poor high temperature performance limits the …

Bead-on-plate friction stir welding was conducted on 6 mm thick plate of Reduced Activation
Ferritic–Martensitic Steel employing polycrystalline cubic boron nitride tool with rotational …

The long-term corrosion behavior of IN-RAFM steel in molten Pb-Li upto 10, 000 h of
exposure was studied in a rotating disc corrosion test facility at 823 K. As-received IN …