Metal/ceramic composites are in high demand in several industries because of their superior
thermo-mechanical properties. Among various composite types, the interpenetrating phase …

In this contribution, authors present a review on the state-of-the-art in the utilization of
industrial and agricultural waste materials for the development of metal–matrix composites …

A vacuum infiltration process was developed to produce aluminium alloy composites
containing various volume fractions of ceramic particles. The matrix composites of …

Carbon nanotube (CNT) reinforced Al-5Mg composites were prepared by combining ball
milling, hot-pressing and subsequent hot extrusion. CNT distribution during milling and …

Abstract Wetting of SiC by Al alloys is a key issue in the preparation of SiC-reinforced Al
matrix composites. The wettability could be improved by alloying of Al, yet controversial …

The mechanical properties of high volume fraction SiC-particle reinforced Al-based metal
matrix composites (MMCs) produced by means of pressurized liquid metal infiltration …

In this paper, oxidized-silicon carbide particle/aluminum 6061 (oxidized-SiC p/Al6061)
composites were fabricated using a spark plasma sintering technique. The microstructure …

A transmission electron microscopy study has been performed on the crystallography of
SiC/MgAl2O4/Al interfaces in a pre-oxidized SiC particulate reinforced SiC/Al composite …

The quantitative effect of the following parameters on the one single step pressureless
infiltration characteristics of bilayer SiC p/rice-husk ash (RHA) porous preforms by aluminum …

The presence of Al4C3 in Al/SiC composites may activate degradation of the material by its
interaction with water; even moisture may cause its environmental degradation. It has been …