[HTML][HTML] A critical review on the fused deposition modeling of thermoplastic polymer composites
PK Penumakala, J Santo, A Thomas - Composites Part B: Engineering, 2020 - Elsevier
Abstract Fused Deposition Modeling (FDM) is a widely used additive manufacturing
technology for fabrication of complex geometric parts using thermoplastic polymers. The …
technology for fabrication of complex geometric parts using thermoplastic polymers. The …
3D-printed carbon fiber reinforced polymer composites: a systematic review
Fiber reinforced composites offer exceptional directional mechanical properties, and
combining their advantages with the capability of 3D printing has resulted in many …
combining their advantages with the capability of 3D printing has resulted in many …
3D printing towards implementing Industry 4.0: sustainability aspects, barriers and challenges
Purpose Environmental degradation has emerged as one of the major limitations of
industrial revolution and has led to an increased focus towards developing sustainable …
industrial revolution and has led to an increased focus towards developing sustainable …
Optimization of printing parameters to maximize the mechanical properties of 3D-printed PETG-based parts
Fused filament fabrication (FFF) is the most popular additive manufacturing method, which
allows the production of highly complex three-dimensional parts with minimal material …
allows the production of highly complex three-dimensional parts with minimal material …
Augmenting effect of infill density and annealing on mechanical properties of PETG and CFPETG composites fabricated by FDM
KS Kumar, R Soundararajan, G Shanthosh… - Materials Today …, 2021 - Elsevier
Abstract Recently, Polyethylene Terephthalate Glycol (PETG) and Carbon Fiber reinforced
Polyethylene Terephthalate Glycol (CFPETG) composites have become the excellent …
Polyethylene Terephthalate Glycol (CFPETG) composites have become the excellent …
[HTML][HTML] Additive manufacturing of PEEK-based continuous fiber reinforced thermoplastic composites with high mechanical properties
Continuous fiber-reinforced thermoplastic (CFRTP) printing is a promising method to
increase the mechanical properties of FDM printed parts. In this study, it was aimed to …
increase the mechanical properties of FDM printed parts. In this study, it was aimed to …
Natural and synthetic polymer fillers for applications in 3D printing—FDM technology area
This publication summarises the current state of knowledge and technology on the
possibilities and limitations of using mineral and synthetic fillers in the field of 3D printing of …
possibilities and limitations of using mineral and synthetic fillers in the field of 3D printing of …
Compressive behaviour of 3D-printed PETG composites
It is known that 3D-printed PETG composites reinforced with carbon or Kevlar fibres are
materials that can be suitable for specific applications in the aeronautical and/or automotive …
materials that can be suitable for specific applications in the aeronautical and/or automotive …
Investigation on the mechanical properties of additively manufactured PETG composites reinforced with OMMT nanoclay and carbon fibers
Polymers and their composites have undergone massive development over the years
through intensive research studies. The plethora of opportunities offered by these materials …
through intensive research studies. The plethora of opportunities offered by these materials …
Impact of carbon fiber reinforcement on mechanical and tribological behavior of 3D-printed polyethylene terephthalate glycol polymer composites—an experimental …
In this work, PETG-based composite polymer using fused deposition modeling technique
has been developed with carbon fiber (CF) as the reinforcement. The effect of the carbon …
has been developed with carbon fiber (CF) as the reinforcement. The effect of the carbon …