To study the failure in the convection section tubes of an ethylene cracking furnace,
macroscopic inspections, chemical composition analysis, metallographic microscopy …

Cassava is the third most significant calorie source in the tropics. Its processing has
changed from traditional methods to stainless steel processing machines. This study …

The present study assessed the resistance against MD corrosion in a single-layer, oxide-
forming NiCrAlSiTaY coating, and a double-layer NiCrAlSiTaY/laser-remelted (LRed) Al 2 O …

A model Fe-9Cr alloy was exposed to various H 2 single bondCO 2 single bondCH 4
mixtures providing different oxygen pressures and carbon activities at 800° C. Three …

Al 2 O 3 thin films were grown by atomic layer deposition to thicknesses ranging from 10 to
90 nm on flexible steel substrates at 300° C using Al (CH 3) 3 and H 2 O as precursors. The …

The features of metal dusting in extremely low nickel austenitic stainless steel (18Cr-21Mn-
0.65 N-Fe) were studied in syngas environment (75% H 2 and 25% CO) at 400-700° C …

Fe-2.25 Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of
steam tube to header is required for production of boiler. Heat affected zone of the weld can …

Al oxide thin films were deposited on 304L stainless steel substrates to investigate their
potential as protective coatings in metal dusting environments. Deposition of the films was …

采用未时效, 200,400℃ 以及500℃ 时效状态下10Cr13Co13Mo5Ni3W1VE (S280)
马氏体超高强度不锈钢为研究对象, 通过X 射线衍射(XRD), 透射电子显微镜(TEM) …

In this study, the cause of a severe failure and degradation of a nozzle in a secondary
reformer unit in an ammonia plant was investigated. The nozzle was made of Incoloy 800H …