A review of analytical aspects of fretting fatigue, with extension to damage parameters, and application to dovetail joints
M Ciavarella, G Demelio - International Journal of Solids and Structures, 2001 - Elsevier
Recent advances by the authors in analytical methods for the analysis of plane fretting
fatigue (FF) contact problems are described, and new consequences for FF damage are …
fatigue (FF) contact problems are described, and new consequences for FF damage are …
Contact mechanics
JR Barber, M Ciavarella - International Journal of solids and structures, 2000 - Elsevier
Contact problems are central to Solid Mechanics, because contact is the principal method of
applying loads to a deformable body and the resulting stress concentration is often the most …
applying loads to a deformable body and the resulting stress concentration is often the most …
Contact geometry adaptation in fretting wear: A constructive review
Fretting is a special type of wear, which appears at the contact interface between two solids
subjected to constant normal load and periodic tangential forces. Although most studies on …
subjected to constant normal load and periodic tangential forces. Although most studies on …
Method of dimensionality reduction in contact mechanics and friction: a users handbook. I. Axially-symmetric contacts
Plane Thermoelastic Waves in Infinite Half-Space Caused Page 1 FACTA UNIVERSITATIS Series:
Mechanical Engineering Vol. 12, No 1, 2014, pp. 1 - 14 METHOD OF DIMENSIONALITY …
Mechanical Engineering Vol. 12, No 1, 2014, pp. 1 - 14 METHOD OF DIMENSIONALITY …
Incipient sliding of rough surfaces in contact: a multiscale numerical analysis
M Borri-Brunetto, B Chiaia, M Ciavarella - Computer methods in applied …, 2001 - Elsevier
In this paper, the Cattaneo theory of frictional contact is extended to elastic half-spaces in
contact through rough disordered interfaces. The discrete version of the Cattaneo theorem is …
contact through rough disordered interfaces. The discrete version of the Cattaneo theorem is …
[HTML][HTML] Frictional elastic contact with periodic loading
Quasi-static frictional contact problems for bodies of fairly general profile that can be
represented as half planes can be solved using an extension of the methods of Ciavarella …
represented as half planes can be solved using an extension of the methods of Ciavarella …
A simple method for solving adhesive and non-adhesive axisymmetric contact problems of elastically graded materials
M Heß - International Journal of Engineering Science, 2016 - Elsevier
An efficient method is presented for solving axisymmetric, frictionless contact problems
between a rigid punch and an elastically non-homogeneous, power-law graded half-space …
between a rigid punch and an elastically non-homogeneous, power-law graded half-space …
Partial-slip frictional response of rough surfaces
If two elastic bodies with rough surfaces are first pressed against each other and then
loaded tangentially, sliding will occur at the boundary of the contact area while the inner …
loaded tangentially, sliding will occur at the boundary of the contact area while the inner …
Two dimensional modeling of elastic wave propagation in solids containing cracks with rough surfaces and friction–Part I: Theoretical background
Our study aims at the creation of a numerical toolbox that describes wave propagation in
samples containing internal contacts (eg cracks, delaminations, debondings, imperfect …
samples containing internal contacts (eg cracks, delaminations, debondings, imperfect …
Frictional energy dissipation in contact of nominally flat rough surfaces under harmonically varying loads
If the nominal contact tractions at an interface are everywhere below the Coulomb friction
limit throughout a cycle of oscillatory loading, the introduction of surface roughness will …
limit throughout a cycle of oscillatory loading, the introduction of surface roughness will …