Progress in metal corrosion mechanism and protective coating technology for interconnect and metal support of solid oxide cells

J Mao, E Wang, H Wang, M Ouyang, Y Chen… - … and Sustainable Energy …, 2023 - Elsevier
Solid oxide cell (SOC) is an important technology for hydrogen energy utilization. Durability
and reliability of metal components including interconnect and metal support of metal …

High-temperature oxidation behaviour of nanostructure surface layered austenitic stainless steel

D Singh, F Cemin, MJM Jimenez, V Antunes… - Applied Surface …, 2022 - Elsevier
The present study investigates the high-temperature oxidation behaviour of nanostructure
surface layered AISI 304L stainless steel. A severely deformed layer of∼ 300 μm thickness …

On the role of surface deformation in the oxidation of NiCr alloys at 340–600 C

T Gheno, C Desgranges, L Martinelli - Corrosion Science, 2020 - Elsevier
The effect of surface deformation on selective oxidation is studied on a Ni-30Cr alloy
prepared by grinding (SiC paper) vs. polishing (diamond suspensions), and oxidized in air …

Tribo-oxidation mechanism of gradient nanostructured Inconel 625 alloy during high-temperature wear

Y Wang, Z Jia, J Ji, W Lu, D Liu - Wear, 2024 - Elsevier
The tribo-oxidation layer is typically formed at the contact interface of high temperature wear,
which exhibits a significant effect on the friction behavior of gradient nanostructured (GNS) …

New insights into the effects of surface nanocrystallization on the oxidation of 321 austenitic stainless steel in a humid oxygen environment at 1000° C

S Pour-Ali, AR Kiani-Rashid, A Babakhani, M Norouzi… - Corrosion science, 2019 - Elsevier
Oxidation behaviour of surface nanocrystallized 321 austenitic stainless steel (SN–321ASS)
and its conventional polycrystalline counterpart (CP–321ASS) in O 2+ 10% H 2 O at 1000° C …

Effect of polishing process on corrosion behavior of 308L stainless steel in high temperature water

C Ma, EH Han, Q Peng, W Ke - Applied Surface Science, 2018 - Elsevier
Abstract Effect of change in surface composition and roughness by different polishing
processes on corrosion of 308L stainless steel in high temperature water was investigated …

Component analysis of a 25-cell stack following 6.7 kh of high temperature electrolysis

J Aicart, K Couturier, M Hubert, K Vulliez, M Elie… - International Journal of …, 2024 - Elsevier
The demonstration of relevant lifetimes for solid oxide electrolysis stacks is an underlying
necessity to the rapidly industrializing technology. Following a 6.7 kh test of a 25-cell stack …

Impact of selective laser melting additive manufacturing on the high temperature behavior of AISI 316L austenitic stainless steel

C Siri, I Popa, A Vion, C Langlade, S Chevalier - Oxidation of Metals, 2020 - Springer
Additive manufacturing allows production of complex geometries or customized designs that
are difficult or impossible to fabricate by conventional means. However, these components …

Precipitation behavior of Laves phase in the vicinity of oxide film of ferritic stainless steel: Selective oxidation-induced precipitation

L Wei, L Chen, H Liu, L Han, N Gong, RDK Misra - Oxidation of Metals, 2020 - Springer
Anti-corrosion behavior of Fe–Cr alloys at elevated temperature is greatly influenced by the
protective nature of oxide scale formed on them. However, precipitates formed underneath …

Impact of pre-oxidation on the reactivity and conductivity in H2–H2O atmosphere of a ferritic stainless steel for high temperature water vapour electrolysis

MR Ardigo-Besnard, I Popa, S Chevalier - International Journal of …, 2022 - Elsevier
The as-rolled K41X (AISI 441) ferritic stainless steel presents unusual behaviour when
exposed in H 2–H 2 O atmosphere at 800° C, with growth of non-protective iron oxides at its …