Lightweight sheet metals are attractive for aerospace and automotive applications due to
their exceptional properties, such as low density and high strength. Sheet metal forming …

This paper presents a historical perspective on the development of the model that was
initially proposed by Prof. Marciniak in 1965 for calculating the Forming Limit Curves (FLC's) …

Experimental and numerical study regarding the uniaxial tensile test and the forming limit
diagram are addressed in this paper for AL2024 with the face-centered cube structure. First …

This study investigates the influence of heat treatment on the anisotropic plastic deformation
behaviors of 6016-O and 6016-T4 aluminum alloy sheets. The two material samples were …

Abstract Al–Zn–Mg–Cu alloys are widely used in large-scale structural components of the
aerospace industry, but research on wire and arc additive manufacturing (WAAM) of Al–Zn …

A detailed investigation on the microstructure and micro-texture evolution in Al–Li alloy has
been carried out following deformation at various strain paths. The stretch forming tests have …

Surface roughening is one of the most fundamental issues which greatly affects the plastic
deformation and ductile fracture behavior of ultra-thin sheet materials. The present study …

The effects of microstructure, texture evolution and strengthening mechanisms on
mechanical properties of 3003 aluminum alloy during cryogenic rolling (CR) and room …

The conventional forging process for 6082 aluminum alloy entails the following steps:
preheating, hot forging, solution heat treatment (SHT), and artificial aging. In this study, 6082 …

A simultaneous prediction of macroscopic deformation and microstructure evolution is
critical for understanding the deformation mechanism of components. In this work, the hydro …