Porous ceramics are now expected to be used for a wide variety of industrial applications
from filtration, absorption, catalysts and catalyst supports to lightweight structural …

Porous yttria-stabilized zirconia (ZrO 2-8 mol% Y 2 O 3, YSZ) ceramics with ultra-low thermal
conductivity (as low as 0.06 W/mK) could be fabricated by tert-butyl alcohol (TBA)-based gel …

Porous yttria-stabilized zirconia (YSZ) ceramics were fabricated by tert-butyl alcohol (TBA)-
based gel-casting method for potential applications in heat-insulation materials. The effect of …

A study on the properties of denture base materials made from PMMA filled with Al2O 3/ZrO2
was carried out. The amount of Al2O 3/ZrO2 filler was fixed at 5 wt%. However, the ratio of Al …

Porous yttria-stabilized zirconia (YSZ) ceramics were successfully fabricated by the dry
pressing method with different size (1.8–20μm) and amount (2–60vol.%) of mono-dispersed …

This paper describes the wear behavior, subsurface damage mechanism with structural
change and indentation creep of bioinert Ti–6Al–4V alloy at different applied loads. Wear …

Porous pre-sintered zirconia is subject to white machining during which its elasticity,
plasticity and resistance to machining-induced damage determine its machinability and final …

Porous yttria‐stabilized zirconia (YSZ) ceramics were fabricated using tert‐butyl alcohol
(TBA)‐based gelcasting with monodisperse polymethylmethacrylate (PMMA) microspheres …

In order to protect the environment, waste materials like bagasse have recently been
recycled in the production of porous ceramics. For the synthesis of nano tetragonal zirconia …

Microsphere powder containing monodisperse polymethylmethacrylate (PMMA)
microspheres and Si 3 N 4 particles was prepared by spray-dried method. The …