The rotating cylinder electrode for studies of corrosion engineering and protection of metals—An illustrated review
The uniform flow generated at moderate rotation speeds, controlled mass transport rate and
uniform current distribution make the RCE attractive for turbulent flow studies of corrosion …
uniform current distribution make the RCE attractive for turbulent flow studies of corrosion …
Electrochemical plating of Cu-Sn alloy in non-cyanide solution to substitute for Ni undercoating layer
This study aims to investigate the electrochemical co-deposition of a Cu-Sn alloy to
substitute for the Ni undercoating layer between the outmost coating layer and substrate …
substitute for the Ni undercoating layer between the outmost coating layer and substrate …
Electrodeposition of Cu-Sn alloys from a methanesulfonic acid electrolyte containing benzyl alcohol
Abstract Deposition of Cu-Sn alloys from a methanesulfonic acid electrolyte containing small
amounts of benzyl alcohol was investigated. Polarisation experiments (cylic and linear …
amounts of benzyl alcohol was investigated. Polarisation experiments (cylic and linear …
Innovative Electrodeposition of Bimetallic Cu–Sn in a Stable Nonelectroactive Pyrophosphate-Based Bath: Reduction and Nucleation Growth Analysis
The timeless allure of Cu–Sn-based intermetallics, commonly known as bronze, stems from
their remarkable versatility across a wide range of applications. When used as coatings on …
their remarkable versatility across a wide range of applications. When used as coatings on …
Effect of thiourea on electrocrystallization of Cu–Sn alloys from sulphate electrolytes
In this work, the effect of thiourea on the initial stages of the Cu–Sn electrodeposition in the
potential range of the underpotential deposition (UPD) of tin from the sulphate electrolyte …
potential range of the underpotential deposition (UPD) of tin from the sulphate electrolyte …
Electrodeposition of tin from a sulphate bath. An EQCM study
In this work, electroplating of tin in sulphuric acid is analysed by combining electrochemical
impedance spectroscopy, cyclic voltammetry and an electrochemical quartz crystal …
impedance spectroscopy, cyclic voltammetry and an electrochemical quartz crystal …
Effect of sonochemical treatment modes on the electrodeposition of Cu–Sn alloy from oxalic acid electrolyte
Methods of scanning electron microscopy, potentiodynamic polarization, and X-ray
diffraction analysis were used to study the kinetic features of the electrodeposition process of …
diffraction analysis were used to study the kinetic features of the electrodeposition process of …
Electrodeposition of Cu-Sn alloy from oxalic acid electrolyte in the presence of amine-containing surfactants
Method of potentiodynamic polarization was used to study the electrodeposition of a copper-
tin alloy from an oxalic acid electrolyte with addition of 10− 5–10− 3 mol dm− 3 of …
tin alloy from an oxalic acid electrolyte with addition of 10− 5–10− 3 mol dm− 3 of …
The Preparation and Properties of Thick Bronze Coating Using Friction-Assisted Jet Electrodeposition
Y Yao, J Cheng, H Ji, S Zhang, H Pang, Y Chen, Z Tian - Coatings, 2024 - mdpi.com
In this study, a novel friction-assisted jet electrodeposition technology was applied to
prepare bronze coating on 40CrNiMoA structural steel surfaces. The bronze electrode was …
prepare bronze coating on 40CrNiMoA structural steel surfaces. The bronze electrode was …
Tin coatings electrodeposited from sulfonic acid-based electrolytes: Tribological behavior
A high efficiency methane sulfonic acid electrolyte used for tin electrodeposition was
studied, and the properties of the resulting deposits were compared to those of tin coatings …
studied, and the properties of the resulting deposits were compared to those of tin coatings …