The degradation of materials due to erosion–corrosion occurs on the components that
handle particle-laden corrosive slurry. The combined attack of mechanical erosion and …

Pipe elbows (bends) are considered critical pressurized components in the piping systems
and pipelines due to their stress intensification and the effect of bend curvature. They are …

The aim of the current study is to investigate the effect of excessive penetration of welding
and natural gas impurity particles on increasing erosion in elbows and reducers. To this end …

Elbow erosion caused by sand mixed in shale gas is a significant issue faced by shale gas
gathering and transportation systems, posing a serious threat to the safe and stable …

The research of CO 2 erosion-corrosion (EC) of carbon steel pipelines in wet gas-solid flow,
as a critical consideration for oil and gas engineering applications, is increasingly receiving …

The non-axisymmetric exciting guided wave can detect the thinning section of the elbow,
and the time domain energy value of the signal collected at the outer arch position of the …

The corrosion behaviors of weathering steels in stagnant water were investigated. The
corrosion rates of weathering steels in stagnant water are lower than those in open …

Erosion-corrosion (EC) is a significant cause of pipeline failure in the petrochemical industry.
The influence of laser surface melting (LSM) on the EC of API X70 steel was investigated …

High pressure gas well ground testing process working pressure can reach up to 105 MPa.
Under severe loading conditions and the influence of internal high-pressure media, the …

Erosion corrosion is a common problem that affects boiler tubes, particularly those in power
plants and industrial settings where hard water and abrasive particles are present in the …