The effects of calcium addition at microalloying levels and hot extrusion process on the
modification of the microstructure and enhancement of the mechanical properties of the Mg …

This study investigates the effect of hot extrusion on microstructure and tensile properties of
Al–15 wt% Mg 2 Si in-situ composite in unmodified and modified with (0.5–5.0 wt%) Gd …

Magnesium matrix syntactic foams (MgMSFs) are emerging lightweight materials with
unique capabilities to exhibit remarkable thermal, acoustic, and mechanical properties. In …

In this study, a practical and swift approach for calculating the number of grains in a
microstructure and determining the ASTM grain size of Mg alloys was demonstrated using …

The effect of friction stir processing (FSP) on the microstructure and mechanical properties of
Mg–4Si composite was investigated. FSP was performed under the traverse speeds of 8 …

The effect of different cooling rates (2.7, 5.5, 17.1, and 57.5° C/s) on the solidification
parameters, microstructure, and mechanical properties of Al-15Mg2Si composites was …

The corrosion behaviors of the hot-pressed Mg-Sn-Zn-Al-Mn magnesium alloys with the
addition of Al in different proportions have been investigated. Paraffin coating technique was …

The effect of different concentrations of Cu (0, 1, 3, and 5 wt%) on the microstructure and
mechanical properties of in-situ Al–15Mg 2 Si composites was studied. The thermal analysis …

The present study investigates the effect of different amounts of SiC particles on the
microstructure, mechanical properties and wear behaviour of the cast and extruded AZ91 …

The modification effects of Ge on Mg 2 Si phase in a Mg-2.5 Si alloy were studied by
computational simulation and experimental investigation. Based on first-principles structural …