There is a global concern with continuous waste production, and efforts are underway to use
these wastes in the construction sector. The negative effects of excessive waste production …

Pavement layers must be sufficiently strong to carry all traffic loads and resist the
accumulation of permanent deformations such as rutting and avoid premature failures …

The low-carbon footprint of using recycled construction and demolition (C&D) aggregates in
civil engineering infrastructure applications has been considered to be a significant solution …

Asphalt concrete (AC) recycling is probably the most cost-effective technique for the
rehabilitation of stressed road pavements and for the construction of new ones. The …

Since the determination of resilient modulus (M r) from the repeated load triaxial test is rather
complicated, due to the expensive procedure and time-consuming nature, attempts have …

Today recycling is one of the most innovative and interesting techniques for the
rehabilitation of destressed road pavements. In recent years the increased interest in this …

Lime-cement concrete (LCC) is a non-structural concrete in which lime and cement are used
as the main binders. However, although LCC has many applications in reducing the …

Cold recycling technique represents the most environmental friendly solution for pavement
rehabilitation nowadays. In fact, this technique allows the use of the highest percentage of …

Due to environmental and economic advantages, cold mix asphalt (CMA) can be considered
as a good alternative to conventional hot mix asphalt (HMA). Nevertheless, it has inferior …

Over recent years, the necessity of reducing the environmental impact of building new
infrastructures has increasingly directed research toward developing innovative …