Abstract Three-dimensional printing (3DP) technology is suitable for manufacturing
personalized orthopedic implants for reconstruction surgery. Compared with traditional …

The objective of this study was to develop full body CAD geometry of a seated 50th
percentile male. Model development was based on medical image data acquired for this …

The objective of this study was to evaluate the effects of sex, loading rate, and age on the
tensile material properties of human rib cortical bone over a wide range of subject …

A tumour resection normally involves a large tissue resection and bone replacement.
Polyether ether ketone (PEEK) has become a suitable candidate for use in various …

The purpose of this paper was to investigate the sensitivity of the structural responses and
bone fractures of the ribs to mesh density, cortical thickness, and material properties so as to …

Introduction: A simplified and computationally efficient human body finite element model is
presented. The model complements the Global Human Body Models Consortium (GHBMC) …

This study presents four validation cases of a mid-sized male (M50) full human body finite
element model—two lateral sled tests at 6.7 m/s, one sled test at 8.9 m/s, and a lateral drop …

The autopsy and histopathologic examination are traditional and classic approaches in
forensic pathology. In recent years, with the tremendous progresses of computer technology …

Background There are concerns regarding initial stability and cutout effect in proximal
femoral nail antirotation (PFNA) treating intertrochanteric fractures. No study have used finite …

Background The purpose of this study is to use 3-dimensional printing (3DP)
polyetheretherketone (PEEK) implants for skeletal reconstructions after wide excision of …