OBJECTIVES: This study was to evaluated the metal–ceramic bond strength of a Co–Cr
dental alloy prepared using a selective laser melting (SLM) technique. METHODS: Two …

The aim of this study was to evaluate the evolution of mechanical properties and chemical
variation across veneering dental porcelain fused to different titanium-based substrates. Test …

Difficulties related to titanium processing (casting) and the problematic titanium-ceramic
bond have been limiting the latter's application in prosthetic dentistry for many years. Recent …

The biomaterials surface, which may only be a few atomic layers thick, constitutes the
important interface between the biomaterials and the external biological environment and …

The aim of the present paper is to investigate the adhesion strength of dental ceramic to
milled and selective laser melted (SLM) Ti6Al4V alloy by experiment and finite element …

Bonding agents have been developed to improve bond strength between ceramic and Co-
Cr metal. The aim of this study was to investigate the influence of two bonding agents on …

Methods: One hundred fourteen samples in the form of bar for the CP titanium and Ti–6Al–
4V alloy were used. They were divided into two groups according to the type of bar. Each …

Objectives To quantify the adhesion of two bonding approaches of zirconia to more aesthetic
glass-ceramic materials using the Schwickerath (ISO 9693-2: 2016) three point bend …

High bonding between the NiCr or CoCr alloys and the ceramic layer is essential for the
clinical success of dental prostheses restorations. Aiming to enhance the bond strength …

Purpose: To investigate the bond strength of low-fusing porcelain to commercially pure
titanium (Ti) that was laser irradiated with different levels of energy and sandblasted …