The effect of chemical composition on the structure, chemistry and mechanical properties of magnetron sputtered WBC coatings: Modeling and experiments
Ternary WBC coatings were non-reactively deposited in order to enhance the envelope of
the mechanical properties of the binary transition metal borides and carbides with a focus on …
the mechanical properties of the binary transition metal borides and carbides with a focus on …
Phase formation, thermal stability and mechanical properties of Nb-BC coatings prepared by combinatorial magnetron sputtering
In this study, combinatorial magnetron sputtering was used to deposit Nb-BC coatings in a
wide composition range. The phase formation, thermal stability and mechanical properties of …
wide composition range. The phase formation, thermal stability and mechanical properties of …
[HTML][HTML] Effect of Nb incorporation in Mo2BC coatings on structural and mechanical properties—Ab initio modelling and experiment
J Ženíšek, P Souček, P Ondračka, Z Czigány… - Acta Materialia, 2024 - Elsevier
This article presents theoretical and experimental findings on the stability of orthorhombic
(Mo 1− x Nb x) 2 BC phase in magnetron sputtered coatings, where molybdenum is …
(Mo 1− x Nb x) 2 BC phase in magnetron sputtered coatings, where molybdenum is …
Synthesis and characterization of Ta–B–C coatings prepared by DCMS and HiPIMS co-sputtering
This study reports on the deposition and properties of Ta–B–C coatings by the co-sputtering
of tantalum, boron carbide, and graphite targets using High Power Impulse Magnetron …
of tantalum, boron carbide, and graphite targets using High Power Impulse Magnetron …
W 4f electron binding energies in amorphous WBC systems
In this paper, we critically evaluate the applicability of the procedure proposed in [Mirzaei et
al., Surf. Coat. Technol. 358 (2019) 843–849] which is based on the fitting of the XPS …
al., Surf. Coat. Technol. 358 (2019) 843–849] which is based on the fitting of the XPS …
Tribological behaviors of Mo2BC ceramics against various counterpart materials
In this study, the tribological behaviors of Mo 2 BC ceramics against four different
counterpart materials were studied. It was established that the tribological properties of Mo 2 …
counterpart materials were studied. It was established that the tribological properties of Mo 2 …
Atomic substitution to balance hardness, ductility, and sustainability in molybdenum tungsten borocarbide
A Mansouri Tehrani, AO Oliynyk, Z Rizvi… - Chemistry of …, 2019 - ACS Publications
Mo2–x W x BC is suggested to be one of the only exceptionally high hardness, transition-
metal-rich materials that also shows moderate ductility and compositional sustainability. This …
metal-rich materials that also shows moderate ductility and compositional sustainability. This …
Phase formation of powders sputtered from X2BC targets and XC+ XB powder mixtures {X= Nb, Ta, W}
In this work, the phase formation and thermal stability of XBC powders are investigated,
where X={Nb, Ta, and W}. XBC powders are synthesized by pulsed-DC magnetron …
where X={Nb, Ta, and W}. XBC powders are synthesized by pulsed-DC magnetron …
Industrially deposited hard and damage resistant WBC coatings
M Kroker, P Souček, L Zábranský, V Buršíková… - Surface and Coatings …, 2023 - Elsevier
The article presents composition-dependent structural and mechanical properties of sputter-
deposited WBC coatings. The industrial batch-coater employs a cylindrical sputter source …
deposited WBC coatings. The industrial batch-coater employs a cylindrical sputter source …
Microstructural changes of amorphous Mo–B–C coatings upon thermal annealing
Abstract Several amorphous Mo–B–C coatings with wide range of compositions were
subjected to thermal annealing to a final temperature of 1000° C in UHV conditions. The …
subjected to thermal annealing to a final temperature of 1000° C in UHV conditions. The …