Biodiesel synthesis from waste vegetable oils, restaurant grease and poultry fat gained
industrial importance compared to the high priced, food based vegetable oils. The major …

Heterogeneous basic catalysts can be used for biodiesel production. The performances of
several types of such materials are described in the literature but small attention is given to …

Abstract Ni x Mg 6− x Al 1.8 Ce 0.2 (with 0≤ x≤ 6) mixed oxides catalysts were prepared by
hydrotalcite route. All the oxides were calcined at 800° C and characterized by different …

Attenuation of excess nutrients in wastewater and stormwater is required to safeguard
aquatic ecosystems. The use of low-cost, mineral-based industrial by-products with high Ca …

The goal of this study is to prepare hydrotalcite pellets and validate their potential utility in
catalysts and catalysts support. Hydrotalcite pellets were synthesized by urea hydrolysis …

In this study, we reported the preparation of Quintinite-3T (Q-3T) and its use as a productive
efficient/effective heterogeneous catalyst for the production of biodiesel. Quintinite-3T (Q-3T) …

Polymer–clay nanocomposites were prepared via physical dispersion of dodecyl sulfate
(DS)-intercalated MgAl–layered double hydroxides (MgAl–LDHs) in polyurethane (PU). The …

Citrate-nitrate method was used to synthesize (Fe, Co)/MgO-Al 2 O 3,(Fe, Mo)/MgO-Al 2 O 3,
and (CoMo)/MgO-Al 2 O 3 catalysts for production of carbon nanotubes. Multi-walled …

The process of synthesizing carbon nanotubes (CNTs) using the method of catalytic gas-
phase pyrolysis has been studied using acetone as a source of carbon. CNTs with outer …

Glycerolysis of rapeseed oil over several solid bases using fixed bed flow reactor has been
studied. It was found that Mg-Al hydrotalcite and Al2O3 supported CaO–ZnO demonstrate …