[HTML][HTML] An optimization case study to design additively manufacturable porous heat sinks based on triply periodic minimal surface (TPMS) lattices

M Modrek, A Viswanath, KA Khan, MIH Ali… - Case Studies in Thermal …, 2022 - Elsevier
Cellular materials have been widely used in thermal management applications such as heat
sinks (HSs) for electronic devices. The topology optimization technique has recently gained …

A medium-voltage medium-frequency isolated DC–DC converter based on 15-kV SiC MOSFETs

L Wang, Q Zhu, W Yu, AQ Huang - IEEE Journal of Emerging …, 2016 - ieeexplore.ieee.org
In this paper, a novel isolated dc-dc converter topology for medium-voltage (MV)
applications is proposed by combining the advantages of resonant converters and dual …

Effects of fin positioning on the thermal performance of a phase change material–filled heat sink with horizontal fins

SH Kim, SH Park, S Pandey, MY Ha - Journal of Energy Storage, 2023 - Elsevier
We conducted numerical simulations to investigate the influence of the horizontal fin
arrangement on the thermal performance of a phase change material (PCM)-filled heat sink …

Circuit-based electrothermal modeling of SiC power modules with nonlinear thermal models

S Race, A Philipp, M Nagel, T Ziemann… - IEEE transactions on …, 2022 - ieeexplore.ieee.org
Silicon carbide (SiC) power devices have the potential to operate at high temperatures
beyond the capabilities of silicon power devices. At increased temperatures, the temperature …

Stepwise design methodology and heterogeneous integration routine of air-cooled SiC inverter for electric vehicle

Z Zeng, X Zhang, F Blaabjerg… - IEEE transactions on …, 2019 - ieeexplore.ieee.org
Carrying on SiC devices, the air-cooled inverter of the electric vehicle (EV) can eliminate the
traditional complicated liquid-cooling system in order to obtain a light and compact …

Forced air cooled heat sink with uniformly distributed temperature of power electronic modules

C Bünnagel, S Monir, A Sharp, A Anuchin… - Applied Thermal …, 2021 - Elsevier
The paper discusses an approach to the design of the forced air-cooling heat sink for power
electronic application to uniformly distribute the temperature of the semiconductor modules …

Investigation of a novel natural convection heat sink for LEDs based on U-shaped mini-heat pipe arrays

Y Jiu, H Fan, W Wang - Applied Thermal Engineering, 2022 - Elsevier
The increasing use of light-emitting diodes (LEDs) requires advances in heat dissipation.
Previous applications of heat pipes for LED cooling faced the challenges of contact thermal …

Application of soft-switching cell with inherent redundancy properties for enhancing the reliability of boost-based DC–DC converters

R Faraji, L Ding, T Rahimi… - IEEE Transactions on …, 2021 - ieeexplore.ieee.org
In this article, the inherent fault-tolerant capability of the soft-switching cell for boost-based
dc-dc converters is investigated. The main switch of boost-based dc-dc converters …

Reliability analysis on power converter of switched reluctance machine system under different control strategies

S Xu, H Chen, F Dong, J Yang - IEEE Transactions on Industrial …, 2019 - ieeexplore.ieee.org
In this paper, a novel reliability assessment scheme is presented to achieve the optimal
selection of control strategies for switched reluctance machine system from the perspective …

A study on practical objectives and constraints for heat conduction topology optimization

DJ Lohan, EM Dede, JT Allison - Structural and Multidisciplinary …, 2020 - Springer
This paper presents some practical formulations for heat conduction topology optimization
problems. In post-optimization analysis, temperature metrics are often used to compare the …