The present article investigates the effect of Surface Mechanical Attrition Treatment (SMAT)
on the high temperature oxidation of AISI 316L, during isothermal oxidation between 650 …

Filament extrusion-based additive manufacturing of metals offers an alternative to the
widespread beam-based counterparts. The microstructure obtained from extrusion-based …

Duplex stainless steel (DSS) is recently considered as a promising candidate to replace
traditional bronze-based alloys in medium to large sized ship propellers, due to its …

The principle failure mechanism in thixoforming dies is thermal fatigue as the mechanical
loading on the tooling is modest owing to a mushy feedstock. Samples of X32CrMoV33 …

In the present work, in situ X-ray diffraction (XRD) was used to identify the oxides formed on
the AISI 316L stainless steel (SS) during isothermal oxidation at 1000° C, in air. The results …

The present study examines the cyclic oxidation behaviour at 900° C in air of sintered 316L
austenitic stainless steels containing 1 wt.% yttria or 0.6 wt.% boron. The microstructures of …

Two types of ferritic stainless steel powders (AISI 409LNb and 434L) have been sintered in
vacuum at three different temperatures (1225, 1250 and 1275° C). The corrosion behaviour …

Additive manufacturing allows production of complex geometries or customized designs that
are difficult or impossible to fabricate by conventional means. However, these components …

In the present study, the microstructure, oxidation behaviour, and thermal stability of the
ER310 and ER446 weld overlay claddings deposited on AISI 316 stainless steel by the gas …

Metal-supported solid oxide fuel cells are regarded as a new generation of SOFC devices.
The use of porous metal substrate provides a high mechanical strength of a SOFCs' support …