With the increasing awareness of environmental protection and health, the preparation of
metal oxide nanomaterials by environmentally friendly methods is favored by more and …

In this study, we quantified nitrite in phosphate buffer solution (PBS) at a pH of 8.00 using
linear sweep voltammetry (LSV) under room conditions. The working electrodes (WE) were …

The Y 2 O 3 decorated with ZnFe 2 O 4 was successfully synthesized using Citrus limon (L.)
Osbeck leaf extract for the first time. A modification of Y 2 O 3 with ZnFe 2 O 4 nanoparticles …

Cold sintering parameters such as, temperature, pressure, aqueous phase, heating rate and
dwelling time has been widely discussed in the literature but the role of starting powder with …

The influence of the dispersity and morphology of ceramic powders on the characteristics of
green bodies and the optical transmittance of YAG: Yb (20 at%) ceramics was considered …

Two types of transparent Y 2 O 3 ceramics without including large scattering sources such
as residual pores, one with very high optical homogeneity (type A) and another one with …

In order to mitigate the detrimental effect of cathode poisoning induced by Cr in solid oxide
fuel cell (SOFC) metallic interconnects, a potential remedial strategy is to deposit spinel …

Under high-frequency microwave irradiation, zirconia ceramics were prepared by sintering
nano-CeO 2 (Ce= 7 mol%) doped zirconia powder. The different effects of temperature …

Novel technique for obtaining of low-agglomerated YAG: Yb ceramic powders by two-step
precipitation using hexamine was developed. This method is based on the reverse …

Abstract Ytterbium monosilicate (Yb 2 SiO 5) were synthesized by cocurrent coprecipitation
method. The precursors were prepared by the hydrolysis and the formation of TEOS with …