Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: A review
The solid particle erosion behaviour of fiber and particulate filled polymer composites has
been reviewed. An overview of the problem of solid particle erosion was given with respect …
been reviewed. An overview of the problem of solid particle erosion was given with respect …
Three-body abrasive wear testing of soft materials
RI Trezona, IM Hutchings - Wear, 1999 - Elsevier
This paper investigates some of the problems associated with determining thethree-
body'(rolling particle) abrasion resistance of soft materials such as polymers and soft metals …
body'(rolling particle) abrasion resistance of soft materials such as polymers and soft metals …
Comparison of wear properties of tool steels AISI D2 and O1 with the same hardness
L Bourithis, GD Papadimitriou, J Sideris - Tribology International, 2006 - Elsevier
Two commercial cold work tool steels, AISI D2 and O1, were heat treated in order to obtain
the same hardness 700HV (60HRc) and were subsequently tested in three different modes …
the same hardness 700HV (60HRc) and were subsequently tested in three different modes …
Cure and mechanical properties and abrasive wear behavior of natural rubber, styrene–butadiene rubber and their blends reinforced with silica hybrid fillers
P Tangudom, S Thongsang, N Sombatsompop - Materials & Design, 2014 - Elsevier
This work investigated the mechanical properties of natural rubber (NR), styrene–butadiene
rubber (SBR) and NR/SBR blends filled with silica hybrid filler, and their abrasive wear …
rubber (SBR) and NR/SBR blends filled with silica hybrid filler, and their abrasive wear …
Erosion wear behavior of polymer composites: a review
S Biswas, A Satapathy… - Journal of Reinforced …, 2010 - journals.sagepub.com
The solid particle erosion behavior of polymer composites has been reviewed. Attention is
paid to the effects of testing variables (eg, erodent type, impact angle, impact velocity) on the …
paid to the effects of testing variables (eg, erodent type, impact angle, impact velocity) on the …
Microstructure and wear studies of laser clad Al-Si/SiC (p) composite coatings
Coatings of a composite material consisting of an Al-Si matrix reinforced with SiC particles
were produced by laser cladding on UNS A03560 cast Al-alloy substrates from mixtures of …
were produced by laser cladding on UNS A03560 cast Al-alloy substrates from mixtures of …
Optimization of testing parameters on the wear behaviour of metal matrix composites based on the Taguchi method
Y Sahin - Materials Science and Engineering: A, 2005 - Elsevier
The weight loss model of aluminium alloy composites with 10wt.% SiC particles by molten
metal mixing method was developed in terms of abrasive grain size, reinforcement size used …
metal mixing method was developed in terms of abrasive grain size, reinforcement size used …
Effect of microstructure on wear performance of NiCrSiBC coatings
An investigation was conducted to determine the extent to which the microstructure of
NiCrSiBC alloy coatings influences micro-abrasive wear resistance. The wear performance …
NiCrSiBC alloy coatings influences micro-abrasive wear resistance. The wear performance …
The prediction of wear resistance model for the metal matrix composites
Y Sahin - Wear, 2005 - Elsevier
The prediction of wear resistance model for the metal matrix composites was developed
based on the Taguchi method. The two-body abrasive wear behaviour of the specimens was …
based on the Taguchi method. The two-body abrasive wear behaviour of the specimens was …
High temperature wear of cermet particle reinforced NiCrBSi hardfacings
The aim of the current study was to investigate erosive and impact/abrasive wear behaviour
of TiC–NiMo and Cr 3 C 2–Ni reinforced NiCrBSi hardfacings at temperatures up to 700° C …
of TiC–NiMo and Cr 3 C 2–Ni reinforced NiCrBSi hardfacings at temperatures up to 700° C …