The effects of cryogenic treatment on cutting tools

S Kumar, NK Khedkar, B Jagtap… - IOP Conference Series …, 2017 - iopscience.iop.org
Enhancing the cutting tool life is important and economic factor to reduce the tooling as well
as manufacturing cost. The tool life is improved considerably by 92% after cryogenic …

Effect of the quenching and tempering temperatures on the microstructure and mechanical properties of H13 steel

J Wang, Z Xu, X Lu - Journal of materials engineering and performance, 2020 - Springer
H13 steel is a typical hot work die steel with good strength and toughness that is often used
to manufacture high-temperature disk springs. However, disk springs occasionally fail after …

Microstructure evolution and fracture mechanism of H13 steel during high temperature tensile deformation

Y Wang, K Song, Y Zhang, G Wang - Materials Science and Engineering: A, 2019 - Elsevier
It is known that mechanical properties of hot working die steel deteriorate during service due
to dynamic recovery, recrystallization and plastic deformation of tempered martensite. In …

A comparative study of salt-bath nitrocarburizing and gas nitriding followed by post-oxidation used as surface treatments of H13 hot forging dies

M Pérez, FJ Belzunce - Surface and Coatings Technology, 2016 - Elsevier
The use of surface treatments is essential to increase the in-service lifetime of hot forging
dies due to their improvement in terms of wear and fatigue resistances. Two thermochemical …

Ta effect on structural, mechanical and tribological properties of TiCN coatings

Ö Baran Acımert, S Çavlan, A Keleş Dayauç… - Journal of Materials …, 2022 - Springer
TiCN coatings are applied to tool steels surfaces to increase tool life because of attractive
properties such as high hardness and toughness. The addition of different alloy elements to …

The effect of quenching/double quenching and tempering heat treatment cycles on the microstructure, impact energy and hardness of AISI H13 tool steel

A Ozer, M Ozer, Ç Atak, G Altuntas - Canadian Metallurgical …, 2024 - Taylor & Francis
In this study, microstructure modifications of AISI H13 steel were studied with different heat
treatments such as conventional quenching, quenching+ tempering/double tempering and …

[PDF][PDF] Effect of Heat Treatment on the Properties of Tool Steel

T László - researchgate.net
Tool production has deep importance for the industry. The developed tool steels are suitable
for the requirements. These tool steels contain large amounts of alloying elements and …

TiCN kaplamaların adezyon ve tribolojik özelliklerine Tanın etkisinin araştırılması

S Çavlan - 2020 - acikbilim.yok.gov.tr
TiCN kaplamalar, yüksek sertlik ve tokluk gibi olumlu özellikleri nedeniyle takım ömrünü
artırmak için takım çeliklerinin yüzeylerine uygulanmaktadır. TiCN'nin yapısına farklı alaşım …