In powder metallurgy Ni-based superalloys, the mechanical properties such as strength,
creep and fatigue resistance at the elevated temperature closely rely on the solution cooling …

This work addresses the numerical correlation of the factors that may affect the hardenability
of AISI 1045 steel submitted to the Jominy end-quench test in three austenitizing …

This article describes the fundamental concepts of heat treatment simulation, including the
physical events and their interactions, the heat treatment simulation software, and the …

Thermite field welds are the link of rails; however, they experience plastic deformation
(batter) along the area above the heat affected zone (HAZ). Here we present the benefits of …

The effect of continuous cooling on solid phase transformations in Ti-47Al-8Ta (at.%) alloy
was studied using Jominy end-quench test. The microstructure of as-quenched Jominy …

Jet impingement cooling is a prevalent phenomenon in various industrial processes,
particularly within metallurgy, and has garnered considerable attention in the literature …

In this work, a numerical model was developed to simulate the continuous cooling of a low
alloy steel. In order to simulate the kinetics of diffusional phase transformations, the Johnson …

When zirconium alloys are used for fuel cladding in nuclear plants, they are β quenched and
then extruded and rolled in the upper α range. At the start of this mechanical process, the …

Prediction of residual stress profiles after quenching is important for a range of industry
applications. Finite element method (FEM) models have the capability of simulate the …

The identification of the spatio-temporal variations of a heat flux density field is addressed in
this paper. The developed technique combines the use of reduced models (BERM method) …