The present trend of miniaturization in various electronic devices has caused higher heat
generation per unit area. Dissipation of highly concentrated heat from these devices is …

Artificial Neural Networks (ANNs) have been applied to deal with flow and heat transfer
problems over the past two decades. In the present paper, recent work on the applications of …

Experimental results of adiabatic two-phase pressure drop in micro/mini-channels for both
multi-and single-channel configurations were obtained from the literature. The collected …

The article presents the experimental results of flow boiling of water in single rectangular
microchannels. Three rectangular copper microchannels having the same hydraulic …

In the present work we design, model and experimentally characterize a two-phase vapor
venting parallel microchannel heat exchanger capped with a 220nm pore, hydrophobic …

Nanofluids are suspensions of nano-size particles (typically 2 to 100 nm) in liquids. Several
research projects in the late 1990s and the first decade of the 21st century indicated that the …

Accurate prediction of the two-phase frictional pressure drop (FPD) facilitates designing
compact phase-change heat exchangers. This study implements ML methods and develops …

Flow boiling heat transfer in a single circular micro-channel of 0.19 mm ID has been
experimentally investigated with R123 and R134a for various experimental conditions: heat …

Heat and Mass Transfer in Particulate Suspensions is a critical review of the subject of heat
and mass transfer related to particulate Suspensions, which include both fluid-particles and …

In this paper, the characteristics of flow boiling pressure drop had been experimentally
investigated in a microchannel heat sink which contains 14 parallel 0.15× 0.25 mm …