Titanium alloys produced by Additive Manufacturing (AM) are often characterised as having
coarse columnar grain structures on account of the prevailing thermal conditions at the time …

Abstract Biomedical Ti-6Al-4 V-5.6 Cu alloys with low elastic modulus, excellent work
hardening and outstanding corrosion resistance were achieved by manipulating the …

In present work, the Ti422 (Ti-4.5 Al-2.5 V–2Fe) alloy with transformation-induced plasticity
(TRIP) effect was designed. The combined effects of the α′ martensite and the mechanical …

Abstract TRansformation Induced Plasticity (TRIP) and TWinning Induced Plasticity (TWIP)
have been successfully proposed to overcome the trade-off between strength and ductility of …

To form growth twins and simultaneously improve strength and toughness by using a β-
eutectoid element, Ti-7Mo-4Al-4Zr-3Nb-2Cr-x Fe alloys were prepared. The phase …

Abstract The Ti-8.5 Cr-1.5 Sn β Ti alloy with twinning induced plasticity (TWIP) effect was
selected for the quasi-static tensile and Charpy impact tests at 298 K and 77 K to determine …

The low work hardening is a prominent deficiency for high-strength titanium (Ti) alloys. The
gradient design of oxygen content was adopted to realize the coupling deformation of {332}< …

This work firstly oxidizes single-phase high entropy alloy (HEA) to form FCC and BCC dual-
phase structure, and also introduces multi-component nano-oxides on surface to prepare …

Metastable β-type Ti alloys that undergo stress-induced martensitic transformation and/or
deformation twinning mechanisms have the potential to simultaneously enhance strength …

There is a deep interest in developing new Ni-free Ti-based alloys to replace 316 L stainless
steel and Co-Cr alloys for endovascular stent application, mainly because the release of Ni …