[HTML][HTML] Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
There are several facets of aluminum when it comes to sustainability. While it helps to save
fuel due to its low density, producing it from ores is very energy-intensive. Recycling it shifts …
fuel due to its low density, producing it from ores is very energy-intensive. Recycling it shifts …
Precipitation kinetics in metallic alloys: Experiments and modeling
A Deschamps, CR Hutchinson - Acta Materialia, 2021 - Elsevier
Nanoscale precipitation is one of the most widely used microstructural tools to manipulate
the properties of metallic alloys, and especially to reach high strength. Optimal …
the properties of metallic alloys, and especially to reach high strength. Optimal …
[HTML][HTML] A critical review: Crystal structure, evolution and interaction mechanism with dislocations of nano precipitates in Al-Li alloys
X Zhao, W Liu, D Xiao, Y Ma, L Huang, Y Tang - Materials & Design, 2022 - Elsevier
Application aspects in aerospace have led to extensive explores and researches on the Al-
Li alloys. Advance of alloy properties and balance of comprehensive performances depend …
Li alloys. Advance of alloy properties and balance of comprehensive performances depend …
Synergy of multiple precipitate/matrix interface structures for a heat resistant high-strength Al alloy
High strength aluminum alloys are widely used but their strength is reduced as nano-
precipitates coarsen rapidly in medium and high temperatures, which greatly limits their …
precipitates coarsen rapidly in medium and high temperatures, which greatly limits their …
Precipitates in aluminium alloys
Precipitation strengthening is a highly complex phenomenon on the nanoscale, responsible
for providing strength in Al-Cu, Al-Mg-Cu, Al-Mg-Zn and Al-Mg-Si alloys. Advances in …
for providing strength in Al-Cu, Al-Mg-Cu, Al-Mg-Zn and Al-Mg-Si alloys. Advances in …
An atomic scale structural investigation of nanometre-sized η precipitates in the 7050 aluminium alloy
Using high-angle-annular-dark-field (HAADF) scanning-transmission-electron microscopy
(STEM), we have investigated η-precipitates in the Al-Zn-Mg-Cu (AA7050) aluminium alloy …
(STEM), we have investigated η-precipitates in the Al-Zn-Mg-Cu (AA7050) aluminium alloy …
[HTML][HTML] Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy
Dynamic recrystallization (DRX) is one of the more convenient and effective means of
refining grains during hot deformation, which is closely related to the precipitation behavior …
refining grains during hot deformation, which is closely related to the precipitation behavior …
Microstructure characterization and mechanical properties of crack-free Al-Cu-Mg-Y alloy fabricated by laser powder bed fusion
Y Chen, C Xiao, S Zhu, Z Li, W Yang, F Zhao, S Yu… - Additive …, 2022 - Elsevier
Additive manufacturing of high-strength Al alloys (such as 2xxx, 6xxx and 7xxx series alloys)
by laser powder bed fusion (LPBF) encounters a challenge because of their high …
by laser powder bed fusion (LPBF) encounters a challenge because of their high …
Atomic structure and evolution of a precursor phase of Ω precipitate in an Al-Cu-Mg-Ag alloy
Precipitates in an aged Al-Cu-Mg-Ag alloy have been characterised using atomic-resolution
energy-dispersive X-ray spectroscopy (EDXS) scanning transmission electron microscopy …
energy-dispersive X-ray spectroscopy (EDXS) scanning transmission electron microscopy …
Precipitation structure and strengthening mechanisms in an Al-Cu-Mg-Ag alloy
M Gazizov, R Kaibyshev - Materials Science and Engineering: A, 2017 - Elsevier
The evolution of the Ω-phase dispersion during aging in an Al-5.6 Cu-0.72 Mg-0.5 Ag-0.32
Mn-0.17 Sc-0.12 Zr-0.1 Ge-0.08 Ti-0.02 Fe-0.01 Si (wt%) alloy was examined at the …
Mn-0.17 Sc-0.12 Zr-0.1 Ge-0.08 Ti-0.02 Fe-0.01 Si (wt%) alloy was examined at the …