Alternative lignocellulosic raw materials in particleboard production: A review

M Pędzik, D Janiszewska, T Rogoziński - Industrial Crops and Products, 2021 - Elsevier
One way to reduce the use of wood resources and simultaneously to manage wastes in the
form of forest and agricultural biomass, as well as biomass originating from the food …

Wood adhesives based on natural resources: A critical review: Part IV. special topics

M Dunky - Progress in Adhesion and Adhesives, 2021 - Wiley Online Library
Various naturally‐based chemicals can be used directly as wood adhesives or are
precursors for the synthesis of adhesive resins. Liquefaction and pyrolysis of wood yield …

Biodegradable, colorless, and odorless PLA/PBAT bioplastics incorporated with corn stover

R Li, X Zhu, F Peng, F Lu - ACS Sustainable Chemistry & …, 2023 - ACS Publications
The effective use of agricultural lignocellulose resources in biodegradable bioplastics has
become the focus of people's attention due to the inappropriate disposal of agricultural …

Optimisation of particle distribution and performance in three-layer tubular particleboards using response surface methodology

Y Li, Z Dai, C Hu, D Tu, H Yun - Journal of Building Engineering, 2024 - Elsevier
To explore the impact of manufacturing parameters on the modulus of rupture (MOR),
internal bond strength (IB), and 24-h water absorption thickness swelling (24 h TS) of tubular …

Utilization of lychee pruning timber as alternative raw materials for manufacturing tubular particleboard

Y Li, C Hu, D Tu, R Chen, H Yun - Industrial Crops and Products, 2023 - Elsevier
Lychee pruning timber can annually provide approximately 7.8-million-ton lignocellulose
resources for particleboard manufacturing in China instead of discharging or burning, which …

Recent Advances in Bio-Based Adhesives and Formaldehyde-Free Technologies for Wood-Based Panel Manufacturing

I Calvez, R Garcia, A Koubaa, V Landry… - Current Forestry …, 2024 - Springer
Abstract Purpose of Review Conventional formaldehyde-based adhesives for wood-based
composite panels are subject to significant concerns due to their formaldehyde emissions …

Influence of the Compression Molding Temperature on VOCs and Odors Produced from Natural Fiber Composite Materials

B Barthod-Malat, M Hauguel, K Behlouli, M Grisel… - Coatings, 2023 - mdpi.com
In the automotive sector, the use of nonwoven preforms consisting of natural and
thermoplastic fibers processed by compression molding is well known to manufacture …

Surface modification and improvements of wicking properties and dyeability of grey jute-cotton blended fabrics using low-pressure glow discharge air plasma

MH Ullah, H Akther, MM Rahman, ABM Foisal… - Heliyon, 2021 - cell.com
Herein, we reported the improvements of wicking properties and dyeability of the jute-cotton
blended (40: 60) fabrics due to the effect of low-pressure glow discharge (LPGD) air plasma …

Preparation and properties of jute stick particleboard using citric acid–glycerol mixture as a natural binder

IP Nitu, S Rahman, MN Islam, M Ashaduzzaman… - Journal of Wood …, 2022 - Springer
The application of citric acid and glycerol as natural binder was investigated for the
manufacturing of jute stick particleboard in this study. The effects of citric acid content (0–30 …

Development of a composite product from fibre yielding crop residues

A Lakshmanan, AN Roy, KK Samanta, L Nayak… - Industrial Crops and …, 2023 - Elsevier
Particleboard is one of the wood-based composite products, developed from wood and
wood industry waste in admixture with an adhesive by thermos-compression. Wood is …