Abstract Dynamic Strain Ageing (DSA) has reached widespread acceptance since its
proposal in the 1940's as the mechanism behind the Portevin-Le Chatelier effect in ferritic …

A novel precipitation-strengthened multicomponent Ni-rich Ni 46.23 Co 23 Cr 10 Fe 5 Al 8.5
Ti 4 W 2 Mo 1 C 0.15 B 0.1 Zr 0.02 (at.%) high-entropy alloy (HEA) was designed with strain …

Inconel 625 is a nickel-based alloy that is mainly used in high-temperature applications.
Inconel 625 exhibits an unstable plastic flow at elevated temperatures characterized by …

Abstract Advanced Ultra Super Critical power plants (AUSC) with intended capabilities of
higher efficiency and less emissions of CO 2 compared with those of conventional power …

Superalloys suffer from attack of the hot corrosion, leading to degradation of their fatigue
durability. Previous numerical studies, mostly by the finite element method (FEM), are rare in …

The selective laser melting (SLM) is a popular additive manufacturing (AM) technique used
for the fabrication of metal parts. In the present study, two 316L stainless steel specimens …

An overview of the microstructural and mechanical properties of Al-Co-Cr-Fe-Ni-Ti high
entropy alloys (HEAs) at high temperatures is presented. With exceptional properties at high …

Inconel 617 alloy is one of the potential materials for high temperature applications such as
steam generator super heater, re-heater parts and intermediate heat exchangers in gas …

Low cycle fatigue (LCF) behavior of solution annealed Alloy 617M forging is studied at 300,
573, 773 and 973 K using strain amplitudes±0.25,±0.4,±0.6 and±0.8% at a nominal strain …

In this work, microstructural changes during creep of Ni-based alloy 617 at 700° C and 165
MPa have been investigated by electron microscopy, and complementarily modelled …