Featured Application Output of the presented study can serve as a theoretical foundation for
application of methods for designing of pile foundations or can serve as a reference study for …

Determining the ultimate bearing capacity of piled foundations has been one of the most
important problems in geotechnical engineering. It has been observed that the pile loading …

The design of a foundation is inseparable from the type and strength of the soil, for example,
clay soils have poor properties for structures due to their low bearing capacity. Therefore, it …

There are many available methods to convert the O-cell pile load test results into the
Equivalent Top Load (ETL) curve. That curve should be representative of the load-settlement …

The pile's ultimate capacity or failure load must be computed by some criteria using load-
settlement curve data gathered during the pile load test. Many scholars have proposed …

A jack-up rig is a self-elevating offshore drilling platform designed for mobile operations in
the marine environment. The rig is supported by 3 or 4 legs, with spudcan foundations at the …

Frankie pile is classified as a large displacement pile cast in place with a concrete mixture.
This paper dealt with the laboratory work to produce a model of the Franki pile similar to the …

Alluvial soils are weak soils require precautions, which have disadvantageous engineering
characteristics such as low shear strength and bearing capacity, high void ratio and …

The object of the study is the improvement of fully saturated silty clay soil using columns of
recycled crushed concrete. ASTM D 2166-Standard Test Procedure for Unconfined …

Pondasi folded plate merupakan modifikasi jenis pondasi tapak dengan penambahan
lipatan pada kedua sisinya dengan panjang dan sudut tertentu. Makalah ini memaparkan …