[HTML][HTML] Digital image and volume correlation for deformation and damage characterisation of fibre-reinforced composites: A review

J Holmes, S Sommacal, R Das, Z Stachurski… - Composite …, 2023 - Elsevier
Digital image and volume correlation (DIC and DVC) are increasingly being used to
measure the deformation and damage behaviour of composite materials. The …

Robust numerical analysis of fibrous composites from X-ray computed tomography image data enabling low resolutions

RM Auenhammer, N Jeppesen, LP Mikkelsen… - … Science and Technology, 2022 - Elsevier
X-ray computed tomography scans can provide detailed information about the state of the
material after manufacture and in service. X-ray computed tomography aided engineering …

Ballistic performance and damage behavior of three-dimensional angle-interlock woven composites under high velocity impact: experimental and numerical studies

C Zhang, L Min, JL Curiel-Sosa, TQ Bui, Z Zhang - Thin-Walled Structures, 2023 - Elsevier
Three-dimensional angle-interlock woven composites (3DAWCs) are usually employed as
exposed components in aerospace and other high-tech areas due to their superior impact …

[HTML][HTML] Improving the delamination resistance and impact damage tolerance of carbon fibre-epoxy composites using multi-scale fibre toughening

AR Ravindran, RB Ladani, AJ Kinloch, CH Wang… - Composites Part A …, 2021 - Elsevier
This paper presents an experimental investigation of the multi-scale toughening
mechanisms for improving the interlaminar fracture toughness, low-velocity impact damage …

Low-velocity impact resistance behaviors of bionic double-helicoidal composite laminates

Y Deng, H Jiang, Y Ren - International Journal of Mechanical Sciences, 2023 - Elsevier
To improve the low-velocity impact resistance of composite laminates, a bionic double-
helicoidal composite laminate (BDHCL) emulated from the micro-structure of coelacanth …

Experimental investigation on Compression-After-Impact (CAI) response of aerospace grade thermoset composites under low-temperature conditions assisted with …

M Seyyednourani, S Akgun, H Ulus, M Yildiz… - Composite …, 2023 - Elsevier
Low-velocity impact (LVI) can provoke catastrophic failure depending on the impact energy,
lay-up configuration, and the operating temperature in fiber-reinforced composite structures …

[HTML][HTML] Assessing stiffness degradation of stiffened composite panels in post-buckling compression-compression fatigue using guided waves

N Yue, A Broer, W Briand, M Rébillat, T Loutas… - Composite …, 2022 - Elsevier
The application of structural health monitoring (SHM) in composite airframe structural
elements under long-term realistic fatigue loading needs to consider the structural behavior …

Experimental and numerical validation of high strain rate impact response and progressive damage of 3D orthogonal woven composites

X Yang, D Li, X Jia, H Zuo, L Jiang, SV Lomov… - … Science and Technology, 2024 - Elsevier
Abstract Advanced three-dimensional (3D) woven composites for aerospace and automotive
applications are commonly subjected to complex dynamic environments involving vibrations …

[HTML][HTML] Effect of double impact positions on the low velocity impact behaviors and damage interference mechanism for composite laminates

B Liao, P Wang, J Zheng, X Cao, Y Li, Q Ma… - Composites Part A …, 2020 - Elsevier
Composite structures are susceptible to repeated low velocity impact usually occurring at
different positions, which is very common but lacks of in-depth exploration. In this paper, two …

Review of microwave techniques used in the manufacture and fault detection of aircraft composites

Z Li, P Wang, A Haigh, C Soutis… - The Aeronautical Journal, 2021 - cambridge.org
Microwaves are a form of electromagnetic radiation commonly used for telecommunications,
navigation and food processing. More recently microwave technologies have found …