Often known as the workhorse among titanium alloys, Ti-6Al-4 V has been useful in the
aerospace and biomedical sectors. For further enhancement of the mechanical …

High-pressure torsion (HPT) is an effective severe plastic deformation method to produce
ultrafine-grained (UFG) and nanocrystalline (NC) materials. In the past, most studies have …

A study on the deformation behavior with increase in strain during upsetting-extrusion (UE)
was studied (ie, No-UE, Small-UE, and Large-UE strains) at 350° C in Al-8.9 Zn-2.2 Mg-2.1 …

The excellent specific strength of magnesium and its alloys makes them appealing for use in
many engineering applications especially in the transportation industry. However, its use is …

This study presents a novel cost-effective Fe 30 Ni 25 Cr 25 Mo 10 Al 10 high-entropy alloy
with a dual-phase microstructure that was processed using cyclic closed-die forging (CCDF) …

The present study investigates the effects of multiple passes of equal channel angular
pressing (ECAP) on magnesium alloy sheets with the assistance of an Inconel plunger …

Aluminium alloys are the most demanding material from the last decade due to their
excellent mechanical characteristics ie high strength, toughness, ductility, and corrosion …

The mechanical characteristics and sliding friction behaviors of AA7075 samples were
studied in regard to structural states formed in them by ECAP and depending on the ECAP …

The paper analyzes the features of plastic flow in compression in sintered Al–Sn–Fe alloys,
some of which were exposed to compaction in a closed die at a pressure of 300 MPa and …

Magnesium alloys are one of the highly promising structural metals. hcp structure makes it
less plastic at room temperature, which greatly limits the development of magnesium alloys …