The effect of extrusion and heat treatment on the microstructure and tensile properties of 2024 aluminum alloy
Q Li, X Zhang, L Wang, J Qiao - Materials, 2022 - mdpi.com
Hot extrusion forming is one of the best cost-effective processing methods to obtain high-
strength aluminum alloys. In order to obtain high performance 2024 aluminum alloy for the …
strength aluminum alloys. In order to obtain high performance 2024 aluminum alloy for the …
[HTML][HTML] TEM study of S'hardening precipitates in the cold rolled and aged AA2024 aluminum alloy: influence on the microstructural evolution, tensile properties & …
SHM Anijdan, D Sadeghi-Nezhad, H Lee… - Journal of Materials …, 2021 - Elsevier
It is known that parameters such as deformation together with the temperature and time of
aging heat treatment, play critical roles in changing the mechanical properties and the …
aging heat treatment, play critical roles in changing the mechanical properties and the …
Effects of re-ageing treatment on microstructure and tensile properties of solution treated and cold-rolled Al–Cu–Mg alloys
H Li, W Xu, Z Wang, B Fang, R Song… - Materials Science and …, 2016 - Elsevier
The effects of re-ageing (RA) at different temperatures on the tensile properties and
microstructures of the Al 2024 alloy (Al–Cu–Mg series alloy) were investigated, which had …
microstructures of the Al 2024 alloy (Al–Cu–Mg series alloy) were investigated, which had …
Deformation behavior of Al-Cu-Mg alloy during non-isothermal creep age forming process
Y Xu, L Zhan, M Huang, RL Shen, Z Ma, L Xu… - Journal of Materials …, 2018 - Elsevier
Creep age forming process (CAF) has been developed for manufacture large aircraft
components. Generally, in CAF, the component should experience heating, soaking and …
components. Generally, in CAF, the component should experience heating, soaking and …
Analytical and FEM analyses of high-speed impact behaviour of Al 2024 alloy
N Gara, V Ramachandran, J Rengaswamy - Aerospace, 2021 - mdpi.com
The present work investigates the impact behaviour of Al 2024-T3 alloy using FEM analysis
performed through LS DYNA software. Johnson–Cookvisco-plastic model is used to study …
performed through LS DYNA software. Johnson–Cookvisco-plastic model is used to study …
Changing distribution and geometry of S′ in Al–Cu–Mg single crystals during stress aging by controlling the loading orientation
J Chen, Z Chen, X Guo, Y Deng - Materials Science and Engineering: A, 2016 - Elsevier
The precipitation behavior of S′ phase in Al–Cu–Mg single crystals during stress-free and
stress aging was investigated by transmission electron microscopy (TEM). Different …
stress aging was investigated by transmission electron microscopy (TEM). Different …
Influence of direct aging treatment on microstructure and mechanical properties of Al-4Cu-2Mg-0.3 Sc-0.7 Zr alloy processed by selective laser melting
H Zhang, Z Chen, W Song - Materials Characterization, 2024 - Elsevier
This work investigates the microstructure and mechanical properties of select laser melting
(SLM) fabricated Al-4Cu-2Mg-0.3 Sc-0.7 Zr alloys after direct aging treatment. In the as …
(SLM) fabricated Al-4Cu-2Mg-0.3 Sc-0.7 Zr alloys after direct aging treatment. In the as …
Influence of Mg Contents on Aging Precipitation Behavior of Al–3.5Cu–xMg Alloy
S Li, J Zhang, J Yang, Y Deng, X Zhang - Acta Metallurgica Sinica (English …, 2014 - Springer
The influence of Mg content on the microstructures and mechanical properties at room
temperatures of Al–3.5 Cu–(0.71–1.81) Mg alloys was studied. Precipitation phases in the …
temperatures of Al–3.5 Cu–(0.71–1.81) Mg alloys was studied. Precipitation phases in the …
An investigation on cold, warm and hot deformation behaviour of Al 2024 alloy under as-received, solution heat treated, peak aged and over aged conditions
A Coşkun, S Gündüz - Canadian Metallurgical Quarterly, 2020 - Taylor & Francis
In this work, the effects of the dynamic precipitation on the mechanical properties of Al 2024
alloy were investigated under as-received (AR), solution heat treated (SHT), peak aged (PA) …
alloy were investigated under as-received (AR), solution heat treated (SHT), peak aged (PA) …
Influence of Li addition on mechanical property and aging precipitation behavior of Al-3.5 Cu-1.5 Mg alloy
Y Deng, J Yang, S Li, J Zhang, X Zhang - Transactions of Nonferrous …, 2014 - Elsevier
The influence of Li addition on mechanical property and aging precipitation behavior of Al-
3.5 Cu-1.5 Mg alloy was investigated by tensile test, scanning electron microscopy (SEM) …
3.5 Cu-1.5 Mg alloy was investigated by tensile test, scanning electron microscopy (SEM) …