Current status and future challenges of autoclaved aerated concrete masonry
Due to its various advantages, autoclaved aerated concrete (AAC) has been gaining
popularity in masonry construction in recent years, and consequently, numerous studies …
popularity in masonry construction in recent years, and consequently, numerous studies …
[HTML][HTML] Modal testing and finite element model updating of full-scale hybrid timber-concrete building
Serviceability of tall timber and hybrid timber buildings under wind-induced vibrations has
become their leading design criterion. Accurate finite element models for predicting their …
become their leading design criterion. Accurate finite element models for predicting their …
Seismic behavior of steel frame infilled with wall-panels connected by sliding joint
Y Li, Z Ning, H Shan, C Gao, S Huang - Journal of Constructional Steel …, 2024 - Elsevier
This paper presents the experimental study on the seismic performance of steel frame
structures equipped with novel sliding connection joints and wall panels reinforced by the …
structures equipped with novel sliding connection joints and wall panels reinforced by the …
Dynamic behaviour of a 13-story reinforced concrete building under ambient vibration, forced vibration, and earthquake excitation
This paper presents a unique study of dynamic behaviour of a full-scale 13-story reinforced
concrete building under forced vibration, ambient vibration, and distal earthquake-induced …
concrete building under forced vibration, ambient vibration, and distal earthquake-induced …
Natural dynamic characteristics of volumetric steel modules with gypsum sheathed LSF walls: Experimental study
As part of a research on structural response of modular buildings and assemblages, this
experimental study investigates the effects of gypsum sheathed light-gauge steel stud walls …
experimental study investigates the effects of gypsum sheathed light-gauge steel stud walls …
Microtremor measurements for assessing the influences of non-structural components on the modal properties and vulnerability of steel structures
Non-structural components (NSCs) in the majority of the FE models are commonly
considered as a concentrated/distributed mass, and their stiffness along with damping ratio …
considered as a concentrated/distributed mass, and their stiffness along with damping ratio …
Influence of non‐structural components on lateral stiffness of tall buildings
A building is a complex assemblage of both structural and non‐structural components
(NSC). Although many NSC, such as partition walls, external walls, parapet walls, stairwells …
(NSC). Although many NSC, such as partition walls, external walls, parapet walls, stairwells …
Influence of the construction process and nonstructural components on the modal properties of a five‐story building
A full‐scale five‐story reinforced concrete building was built and tested on the NEES‐UCSD
shake table during the period from May 2011 to May 2012. The purpose of this test program …
shake table during the period from May 2011 to May 2012. The purpose of this test program …
Cyclic testing of square CFST frames with ALC panel or block walls
J Wang, B Li - Journal of Constructional Steel Research, 2017 - Elsevier
An experimental program was conducted to investigate seismic behavior and failure modes
of square concrete-filled steel tube (CFST) frames with autoclaved lightweight aerated …
of square concrete-filled steel tube (CFST) frames with autoclaved lightweight aerated …
Experimental and numerical studies of prefabricated structures using CFST frame and composite wall
J Bian, W Cao, Q Qiao, J Zhang - Journal of Building Engineering, 2022 - Elsevier
A prefabricated structure composed of a lightweight concrete filled steel tube (CFST) frame
and an embedded steel plate (ESP) composite wall is proposed, known as a CFST frame …
and an embedded steel plate (ESP) composite wall is proposed, known as a CFST frame …