Ultrasonic metal welding (USMW) technology receives widespread attention because of its
advantages of environmental protection, high efficiency, high welding strength, and low joint …

Generation of micron-scale structures on a substrate is an emerging area in the
manufacturing sector owing to its application in different fields such as micro-lenses, micro …

The ultrasonic spot welding (USW) is used to develop the lap joints of AA 6061-T6
aluminium alloy because it is difficult to spot weld using resistance spot welding (RSW) and …

Friction stir welding (FSW) of brass (CuZn40) and aluminum alloy (AA1100-O) carried out in
the open air (AFSW) is affected by several weld flaws, poor heat affected zone (HAZ), and …

The traditional step-reduction method is popular for modeling mechanical vibration of
variable-section homogeneous beams (VHBs). However, this method cannot transfer …

Ultrasonic assisted machining is a proven green and sustainable manufacturing technology
owing to low power consumption, no/low usage of lubricant, pollution free nature of the …

A comprehensive and integrated review about the current state of ultrasonic spot welding of
aluminum to copper with numerous crucial issues containing materials flow, plastic …

Flexible ring mode (FRM) laser technology can generate different powers by adjusting the
power ratio of the inner and outer rings, and has great potential for welding copper and its …

Laser welding-brazing process was developed for joining 5052 aluminum alloy and H62
brass in butt configuration with Zn-15% Al filler. Effect of welding speed on microstructural …

ABSTRACT The Al/Mg bimetal was fabricated by using the lost-foam casting method that is
considered a near-net forming process, and the microstructure evolution of the Al/Mg bimetal …